Domin koyon yadda za'a iya koyar da su sosai, ana buƙatar ci gaba da horo na tsari. Dole ne maigidan ya sami ikon riƙe kuran a cikin hannun, kuma da sauri kuma cikin sauƙin juya su cikin tafin hannun biyu ta kowane irin agogo da kuma agogo a lokaci guda yayin damfara da buɗe sassan aiki.

Rike murfin hannun ka na dama, kuma ikon murfin ya ta'allaka ne a hanun hannunka, wanda aka sanya tsakanin yatsa da babban goshin. Ya kamata bangarorin masu aiki su kasance a gefen babban yatsa da yatsun hannu.

Idan kuna buƙatar kunna baƙin ƙarfe a agogo, ana sanya su a cikin farkon farkon a hannun dama kuma fara juya tare da goga na hannun dama.

Don haka, ya zama dole a kware fasahohin mallakar karfi ta yadda zaka iya, cikin sauki ba jujjuya komai ba, barin aikin da aka yi, a kuma bude shi kuma a rufe su.

2.1 Stacking curls

Duk da yawancin nau'ikan salon gyara gashi, abubuwan da suka fi dacewa su ne raƙuman ruwa da shuni. Canje-canje a cikin bayyanar su ko matsayin dangi yana haifar da canje-canje a cikin salon gyara gashi.

Ana yin gyaran gashi ne kawai daga raƙuman ruwa ko kuma daga curls kawai - a kowane hali, zai iya zama na asali da peculiar. Amma shahararrun salon gashi wanda ya haɗu da raƙuman ruwa da curls. Madadin waɗannan abubuwan, da canjin su a wasu wurare na fatar kai kuma suna ba kowane salon gyara gashi da asalinsu.

2.2 Nau'in curls

Ta hanyar siffar su, an rarraba curls zuwa nau'ikan da yawa: madaidaiciya, ko mai sauƙi, oblique, ƙasa, a tsaye, wrinkled kuma a layi daya a cikin layuka da yawa.

Ana ɗauka madaidaiciyar curls ana kiran su zama curls ne a kwance. Idan suna cikin layuka da yawa na kwance, an kira su da layi ɗaya.

Slanting curls. A kan fatar kan mutum, kawunan yawanci suna a wani kusurwa na kimanin 45 ° zuwa a tsaye ko a kwance.

Crumpled curls lokacin da aka sanya salon gyara gashi ta hanyar da gindinsu ya yi kama da igiyar ruwa, yana wucewa zuwa ƙarshen gashi yana jujjuyawa.

Curls, ƙarshen abin da ya sauka daga tsakiyarsu a cikin nau'i na karkace, ana kiran shi zuriya curls. Don yin irin waɗannan curls, ana buƙatar dogon gashi - aƙalla 20-25 cm.

2.3 Hanyar gyaran gashi a cikin curls

Hanyar yin amfani da curls curls "ƙasa" yana ba ku damar yin launuka iri-iri, kodayake duk suna ɗaukar nauyi da nauyi. Lokacin amfani da hanyar "ƙasa", ana bada shawara don yin curls karami da wuta, saboda tare da manyan curls gashi zaiyi kama da wuya.

Curls curls a cikin hanyar "sama", akasin haka, yana ba da ƙarancin gashin gashi da airiness.

Amma saboda gaskiyar cewa curls hawa sama lokacin da hadawa ya ba da babban ragi, ba koyaushe dace ba ne a yi amfani da wannan hanyar ita kaɗai.

Curling curls a cikin hanyar "takwas" yana ba ku damar yin salon gyara gashi daga dogon gashi mai adalci. Wannan hanyar curling yana ba da gashi mai mahimmanci tare da mafi girman ƙarfi.

Mafi kyawun yanayi don gashi shine waɗanda gashi ke juya akan kayan, ko ya zama murfi ne, ko kuma murhun lebbin ne, yana iya komawa zuwa gundarin jujin shi. A wannan yanayin, curl na roba ne.

Don haɗawa cikin curls, kauri daga tushe na abin toshe gashi bai wuce 4 cm ba.Wannan dole ne a sadu da wannan yanayin don gashi ya zama mai dumama. A lokaci guda, kulle gashi bai kamata ya zama mai kauri ba. Lokacin da zazzage gashi zuwa cikin curls, dole ne mutum yayi la'akari da kauri ba kawai ba, har ma da tsawon saƙar. Lokacin da gashin ya fi tsayi, ya fi kauri a lokacin da yake lullube da dunduna.Dangane da wannan, ya zama dole don iya daidaita tsawon da kauri daga kashin ya dogara da tsawon gashi. Tsawon gashin da ake buƙatar jujjuya shi zuwa cikin curls, da laushi shine ƙyallen gashin da ake buƙatar ɗauka don kunna iska.

Kafin a ci gaba da warware gashi da karfi, yakamata a shirya kayan aikin da na’urori. Don aiwatarwarsa ana buƙatar: ƙwaƙƙƙƙƙƙun ƙwararriyar ƙwararriyar dutsen da ake buƙata, ƙarfe ko tsefe tsefe, wato, ɗayan da baya narkewa daga aikin babban zazzabi.

Don iska da gashi cikin curls za ku buƙaci maɓallin gashi na bakin ciki ko shirye-shiryen bidiyo don gyara kowane curl bayan curling. Kafin yin curling, shafa saƙar motsi na gashi a tsawon gashi.

Shin kun taɓa son yin sabon, salon gyara gashi mai ban mamaki don bikin musamman? Abu ne mai sauqi! Yi shirye-shiryen masu gashi na lantarki mai zafi - kuma an samar da tukunyar kwararawar curls (siffa 2).

Kafin curling, yi amfani da mousse salo tare da duk tsawon gashin - kuma kuna iya farawa!

1. Da farko za a kunna baƙin. Sannan raba gashi zuwa sassa, farawa daga bayan kai. Auki ƙulli na gashi tare da faɗin 4-5 cm kuma kuyi shi da faransa.

2. Yi hankali a sakin dungura mai rauni kuma tsare shi a tsakiyar tare da “marasa ganuwa”. Ci gaba ta wannan hanyar har sai kun iska iska ta ƙarshe.

3. Kalli gashin gashi daga bayan kai. Don ba da salon gyara gashi ya zama mafi girma da kuma dabi'a, raba curls tare da yatsunsu tare da tsawon tsawon.

4. Graaura yatsun ku da babban adadin gashi daga ɓangarorin biyu na kai kuma ku maimaita su zuwa ƙarshen.

5. Yanzu haɗa haɗi biyu kuma ɗaure su tare da “marasa-ganuwa” a bayan shugaban.

6. Sake sauran gashin don ya faɗi a bayanku.

7. Yi amfani da yatsunsu don ɗaukar ɗan yumɓu kaɗan, kuma, jan curan curls, gudu hannayen ku gaba ɗaya tsawon su.

3,5. Salon Gashi

Salon gashi ana kiransa curling dasu na ɗan wani lokaci.

Salon gashi yana kunshe da ayyuka daban-daban wanda aka sa salon gyara gashi kowane irin salo da tsari.

Akwai hanyoyi da yawa don yin gyaran gashi:

• Salon sanyi (salo da tsefe da yatsunsu, Salo da curlers),
• Salon iska (salo da goge goge da mai gyaran gashi),
• salo salo (salo)
• hade salo (salo a hanyoyi da yawa).

Tsawon lokacin adana salo zai dogara da dalilai da yawa, kamar su: tsarin gashi, tsayayyar shi da roƙon sa, kayan aikin da aka zaɓa da diamitarsu, abun don salo, yanayin yanayi.

Yi la'akari da farko abubuwan asali na salon gyara gashi. Kashewa - mafi yawancin abubuwan da ake amfani da su na salon gyara gashi, madaidaiciya layin rarraba fatar kan mutum zuwa kashi biyu daidai ne ko kuma ba a daidaituwa. Yin rabuwar na iya zama na gaba, gefe da curly:

• raba madaidaiciya rarrabawa kan fatar kai zuwa kashi biyu daidai ne,
• a kaikaice - zuwa bangarori biyu marasa daidaituwa kuma galibi suna shudewa daga gabanin tsallen gaban kai zuwa babban matsayi na kai,
• Raguwar da ta ƙunsa ta ƙunshi madaidaiciya layuka da yawa waɗanda ke fasalta fasali.

Rabin kashi-kashi - taqaitaccen rabuwar layi. Hakanan yana iya zama madaidaiciya, a kaikaice ko curly.

Maganar ruwa - wannan bangare ne na gyaran gashi wanda ke da ƙyalli mai lanƙwasa kuma an iyakance shi a ɓangarorin biyu ta rawanin, rawanin - mafi girman layin, inda gashi ke canza alƙawarinsa zuwa akasin haka. Kambi na iya zama babba da ƙasa, kunkuntar da faɗi. A kunkuntar kuma mafi rawanin rawanin, mafi tsayi da gyaran gashi.

Dangane da fuska, raƙuman ruwa na iya yin haɓaka da juyawa. Ana karkatar da taguwar igiyar gaban fuska kuma ya zarce gefen layin gashi. Ana tura taguwar ruwa daga fuska.

Dangane da rarrabuwa, raƙuman ruwa suna madaidaiciya, ƙaiƙayi kuma mai juzu'i. Kai tsaye raƙuman ruwa suna kasancewa a wani kusurwa na 45 ° zuwa rabuwar, raƙuman ruwa masu tsinkaye sun yi daidai da rabuwar, kuma raƙuman ruwa mai jujjuyawa suna karkata ga tunanin hasashen.

A cikin girmanta, raƙuman ruwa suna da fadi da fadi, mara nauyi da zurfi. Yatattara da zurfi da zurriyar, mafi tsayi da gyaran gashi zai šauki. Ingantaccen iska shine 2 cm.

Lockon - kulle gashi ya zube a cikin bututu. Dangane da wurin da ke kan kai, an rarrabe a tsaye, kwance, da makullin curling. Dangane da ka’idar kunsa, curls suna rauni sama, ƙasa, adadi takwas, rabin-takwas.

Salon gashi mai sanyi. An yi amfani da salo tare da tsefe da yatsunsu na dogon lokaci. Wannan salo ba ya cutar da gashi. Wannan hanyar sakawa yana ba ka damar bambanta nisa da zurfin raƙuman ruwa. Yi amfani da wannan tsari na aiki:

• hura gashi tare da kulle mai salo sannan a hankali a dawo da baya daga goshi. Idan akwai rabe-raben abubuwa, sai a rarraba daga rabuwar a cikin fuskar rarraba gashi a cikin salo,
• gabatar da tsefe a saman gashin kai ko goge ko a rarraba kuma a matsar da tsefe a gefe (Fig. 3.2, a). Samu farkon kalaman farko. Riƙe tsefe a hannunka na dama a hanya ta uku (duba sashi-2.1),

Hoto 3.2. Yin salo mai salo na gashi:
a - rabin-kala, b - igiyar ruwa daya, c - raƙuman ruwa biyu

• Latsa gashin gishirin rabin tare da tsefe zuwa fatar kan hannun hagu (manuniya yatsa ko gefen dabino da dan yatsa kadan). Shigar da tsefe a cikin gashi kadan a gaba kuma motsa shi a cikin kishiyar sashi (siffa 3.2, b). Cire hagu daga dunƙulen dunƙule na rabin-motsi ka danna motsi na rabin-biyu. Samu igiyar ruwa daya
• Bayan haka kuma, tare da hannunka na hagu, danna gashin rabin-rabin tare da tsefe zuwa fatar kan mutum, matsar da tsefe zuwa gefe. Samu motsi na uku.
• maimaita motsi na tsefe baya da gaba da matse gashi da hannunka har sai ka sami adadin raƙuman ruwa da suka dace,
• tun lokacin da aka shimfiɗa shi a cikin raƙuman ruwa ɗaya daga cikin kai, je zuwa wani, ci gaba da sanya gashi a cikin hanyar (siffa 3.2, c).

Lokacin kwanciya a wasu wurare, don kada raƙuman ruwa na raƙuman ruwa da raƙuman ruwa su motsa, dole ne a daidaita su da shirye-shiryen gashi da aski, amma dole ne a kula sosai don tabbatar da cewa babu ruwan shafawar gashi.

Hoto 3.3. Nau'in daidaitawa na zoben lebur

Don gajere gashi a bayan kai, salo a cikin nau'ikan zoben lebur za a iya yi:

• sanya kulle mai salo a kan gashi,
• tare da yatsa da kuma babban yatsun ku, ku karkatar da makullin agogo ko kuma agogo kuma ku gyara shi da gashin gashi guda ɗaya ko biyu, shirye-shiryen bidiyo, shirye-shiryen bidiyo, gashin gashi marasa ganuwa (Hoto 3.3),
• nisa na zoben shine 1.5x1.5 ko 2x2 cm. Twist agogo a cikin layi daya kuma a kan agogo a daya, da dai sauransu.

Salon gashi da curlers a halin yanzu ba dacewa sosai a cikin kayan gyaran gashi da na gashi. Koyaya, koyaushe akwai abokan ciniki waɗanda suka fi son wannan nau'in salo na musamman. Bugu da ƙari, nau'ikan curlers na zamani suna ba ku damar samun kyawawan curls na halitta, musamman kan dogon gashi. Ta amfani da kayan aikin salo daban-daban (salo na gashi), zaku iya bambance bayyanar mai ita. Don yin wannan, yana da mahimmanci don zaɓin madaidaiciyar diamita na curlers, kunna su yadda ya kamata kuma bushe yadda yakamata, daidai da hada gashinku. Misali, hada curls da goge, zaku iya shimfiɗa strands, ko kuma zaku iya raba biyun da yatsunsu ku yayyafa da ado, ta hanyar samun salo na zamani don salo. Lokacin amfani da curlers na bakin ciki, curls koyaushe zai zama ƙanana da na roba. Masu tsaka-tsalle tsaka-tsaki a kan gajeren gashi za su ba da kwalliyar kwalliya da girma, a kan matsakaiciyar tsayi - babban waviness, kuma a kan dogon - taushi raƙuman ruwa. Ana iya amfani da manyan curlers don daidaita gashi mai gashi. Saya tare da curlers koyaushe ana yin shi a kan rigar (alal misali, taushi tare da kayan salo) gashi.

Dokoki don lalata gashi a kan curlers:

• Kafin aiwatar da abin rufe jiki, gashi ya kasu kashi uku bisa tsarin da aka zaɓa na curlers,
• kauri daga jika yakamata ya wuce diamita na curler,
• da nisa daga cikin toka ya zama dan kadan kasa da tsawon na curler,
• don kaɗa tushen dunƙule, an jan dutsen a kusan 90 ° zuwa saman kai,
• juya curlers domin da cewa gashin an sanya shi a kan jirgin sama na curler,
• yayin da suke iska, suna kiyaye tashin hankali gashi,
• ya danganta da nau'in curler an gyara su tare da band ko roba.

Hoto 3.4.Hanyoyi masu banbancin gashi don curlers

A cikin ɓaure. 3.4 yana nuna makircin gyaran gashi akan curlers. Bayan duk ciwo ya ji rauni, an saka mai siye da suturar gashi kuma saka shi ƙarƙashin sushuar. Kafin barin curlers, an basu izinin kwantar da hankali don magance ingantattun curls. Isar da curlers fara daga ƙananan occipital yankin, sabõda haka, gashi ba tangled. Daga nan sai a ci gaba da hada gashin.

A fatawar abokin ciniki bayan kunsa, zaku iya yin tsefe ko lalata gashi. Don ba da salon gyara gashi mai laushi, zaku iya amfani da gel ko kakin zuma don daidaita gashinku. Don tanadin ƙara girma, an gyara gashin gashi tare da varnish.

Salon iska. Ana yin gyaran gashi tare da buroshi da bushewar gashi dangane da tsawon gashin.

Gashi mai gyara gashi don dasa tushen tare da lebur mai ƙoshin lebur ana kiransa bam. Ana amfani dashi a dakunan kwanan maza da na mata yayin yin kullun maraice da salon gyara gashi.

Wannan tsarin yana gudana kamar haka:

• An ɗauka makulli tare da buroshi a tushe, da haɓaka gashi, don ɗaga mafi girman. An kwarara iska mai gudana zuwa tarko da wuya zuwa ga kai kuma gashin da ya kafa ya daidaita shi ta gashi. Bada izinin wannan rukunin kashin yayi sanyi a goga har sai ya bushe gaba daya,
• sun shimfiɗa duka maɗaurin tare da goge tare da goga, suna jagoranci rafin gashin gashi a cikin layin layin salon haihuwar. Bayan haka, cire goga daga busar gashi,
• haka kuma, suna ci gaba da salo a sauran sassan kai, sannu a hankali suna motsawa daga yankin occipital zuwa gabanin.

Ta amfani da goga mai zagaye, tsara ƙarshen gashin ko daidaita madaidaiciyar gashi. Ana kiran wannan hanyar salo gogewaHakan ya shafi ɗakin mata ne kawai.

Mai gyara gashi ya dace don salo na gashi na kowane tsayi. Gashi daga gashi mai gajeren gashi zai zama mafi alfahari kuma zai daɗe idan gashin ya jika a tushen tare da gel, varnish ruwa ko kumfa don salo.

Shigowar gashi yana buƙatar kulawa ta musamman. Wajibi ne don bushe gashi sosai a hankali, ƙoƙarin tabbatar da cewa gashin da ya riga ya bushe bai shiga cikin rigar gashi ba, don aiwatar da cikakkun bayanai a sarari, a lokaci guda ƙirƙirar nau'i uku na gashin gashi kuma tabbatar da cewa ragin iska bai ƙone fata ba. Don yin wannan, ana bada shawara don jagorantar rafin iska a cikin layin tangent zuwa kan kai, daga tushen har zuwa ƙarshen makin. Bayan salo, hada gashi tare da haɗuwa tare da hakora masu saushin gaske.

Ta amfani da tsefe, buroshi mai laushi da goge gashi, zaku iya yin raƙuman ruwa. Don yin wannan, ana riƙe tsefe daidai da ƙyallen da aka rabu, an saka hakoran goga a cikin gashi a nesa da nisa na yatsunsu biyu ko uku kuma a ɗan motsa shi zuwa dama. Don haka suka samar da igiyar farko. Daga nan sai a huɗa tsefe tare da haƙoransa sama, a liƙa kan kanta kuma a bushe tare da kwararar iska, a miƙe zuwa hagu. Ana samun motsi na biyu daidai kamar yadda yake, yana canza alƙawarin mai bushewa da bushewar gashi. Farkon yana motsa 1 cm zuwa hagu kuma ya juya kansa. Sanya gashi tare da mai gyara gashi zuwa gefen dama.

Kuna iya fara salo daga yankin parietal na kai ko daga rabuwar. Ana ɗaukar goga a layi ɗaya a kai, yana ɗaure maɗaya tare da shi, ana ɗaga gashi daga tushen kuma ya juya zuwa ɗan kansa, bayan wannan an goge goga daga rabuwa, a hankali yana bushe gashi tare da gaba ɗayan goga. Ana maimaita wannan dabarar sau da yawa don ba da gyaran gashi ya zama dole.

Zaku iya yin dogon zango akan burodin zagaye sannan ku bushe kowane yanki da farko daga waje, sannan kuma daga ciki. Don yin wannan, sai a harba dambarwa a hannun hagu, a ɗan murɗaɗa goge, a sanadi wanda gashi an gyara shi sosai a goga, a ɗauka mai kamar goge. A wannan yanayin, gashin zai yi kyau a ƙasa, ba tare da yin tunanin raunin rauni a kan masu ɓoye ba (siffa 3.5).

Hoto 3,5. Zagawar goge-goge

Salo mai zafi. Ana yin salatin gashi na gashi ne kawai akan bushe da gashi mai tsabta, tunda yana da haɗari don amfani da maƙeran lantarki tare da gashin rigar.Kuma idan a gaban Hauwa na fesa gashi ko wasu fixative an shafa wa gashi, to wannan zai lalata tsarin gashi - za su rasa haskakawarsu, za su bushe da bushe.

Wannan tsarin yana gudana kamar haka:

• Rarrabe guba tare da guguwar, ta kama shi da ƙarfi a tushen gashi, sanya shi tsakanin safa da guɓa,
• dumama ta tura turaruna a tsawon tsawon murhun, kuma ka hura gashin a kan kwargin kwakwa. Domin kada ku ƙona fatar, sai a haɗa tsefe a ƙarƙashin kulle gashin da ake rauni a halin yanzu (siffa 3.6),

Hoto 3.6. Salon gashi tare da murhun lantarki

• riƙe don 20 - 30 s kuma a hankali cire ɓarakin daga cikin curl. Yakamata ya kamata ayi amfani da hanyar yin iska tare da kwarkokin lantarki ta hanyar abin da ake so na salon gyara gashi nan gaba,
• Yi wannan aikin a duk sassan kai inda ake son samun curls,
• Da yake an karɓi curls-tubes, zaku iya ci gaba zuwa salo na ƙarshe. Idan ya cancanta, yi amfani da fata, daskarewa, man aski, aski, da sauransu,
• gyara salon gyara gashi.

Ya kamata a lura cewa ba a bada shawarar amfani da kullun da karfi na lantarki ba, tunda gashi ya bushe sosai.

Hadawa da dulmuyar gashi. Waɗannan ayyukan suna da mahimmanci don ƙira wasu samfurori na salon gyara gashi na zamani. Lokacin aiwatar da ayyukan biyu, yi amfani da gamswa tare da haƙoran matakan daban.

Hadawa wani abu ne mai laushi wanda ya shafi gashi sama da fadi da kuma kauri daga aikin da aka sarrafa. Lokacin yin haɗuwa, ana kula da makaman daga ciki da na waje. Fara farawa, da farko, dunƙule-wutsiya ke raba maɗaurin a yankin da ake so fatar. Daga nan sai su kama sashin tsakiyar makulli a tsakanin tsakiya (ko babba) sannan a nuna yatsun hannun hagu suna zazzage shi sama da kan kai. Bayan haka, ana kawo tsefe cikin kulle gashi a nesa na 5 - 6 cm daga gindinsa. Bayan haka, ta hanyar haɗa kai wa tushe daga dutsen, za a fara yin amfani da gwagwarmaya. Motsi na tsefe ƙasa zuwa gindin murhun an dakatar da shi lokacin da aka fara jin duriyarsa, kowane lokaci daga nan tsefe zai daina zuwa gaba kuma ya yi nisa daga gindin murhun. Yawancin waɗannan motsi ana maimaita su sau da yawa, kuma duk lokacin da aka gabatar da tsefe 1-2 cm sama. A lokaci guda, hagu na riƙe kulle gashi kuma ana motsa shi zuwa ƙarshen kulle. Matsar da yatsunsu na hagu na sama da murɗa kuma gabatar da tsefe cikin gashi ya zama daidai. Juyawa daga hanu tare da tsefe ana yinsa kamar ana cikin da'ira. Tare da irin waɗannan hanyoyin, ana kula da wani yanki na gashi a garesu.

Tupirovanie - gashin gashi kawai shine rabin kauri daga kashin. Ana iya tunanin tuping wani ɓangare na haɗuwa. Lokacin yin tupirovaniya, wani yanki mai gashi yawanci ba a jujjuya shi zuwa ƙwanƙwaran, amma a cikin shugabanci wanda zai kwanta a cikin salon gashi. A wannan yanayin, ba a gabatar da tsefe zuwa ga kauri duka ba, amma don haka haƙorin sa a cikin kowane hali zai fito daga waje da makaman. Ta wannan hanyar, ana amfani da gashi mai gashi kawai daga gefen da zai zama na ciki a cikin salon gashi.

Curls mai laushi da salo

Mata sukan canza hotonsu koyaushe, gashi mai gashi - madaidaiciya tare da ƙarfe, masu madaidaiciya suna fuskantar salo na gashi da karfi. A matsayin hanyar gyaran gashi, salo mai zafi ya wanzu na dogon lokaci, a yau masu ba da shuni ba sa amfani da wannan hanyar sau da yawa, amma har yanzu idan kuna son samun roba mai saurin yaduwa, zaku iya amfani da karfi mai ƙarfi ga gashi.

Me yasa wannan samfurin ya shahara sosai da mata .. >>

Haka kuma, a yau ya zama ƙara zama sanannu don ƙirƙirar raƙuman ruwa da curls, hanya mara kyau da curls na soyayya. Don salo na ƙarshe, ƙwayoyin to cikakke ne kawai, amma kuna buƙatar sanin wasu ƙamus, tunda abubuwan dumama a cikin salo na gashi bazai zama marasa lahani kamar yadda suke kallo da farko ba.

Misali, yakamata a yi amfani da mai gyaran gashi a cikin hikima, tunda iska mai zafi na iya lalata gashi sosai (“Sanya matsakaiciyar gashi tare da mai gyara gashi ba tare da lahani ba”). Haka kuma, idan ya zo da karfi mai karfi, ba za ku iya yin ba tare da kare gashin ku da wasu dabaru masu sauki ba yayin ƙirƙirar salatin gashi mai zafi tare da karfi.

Ana shirya gashi don salo da karfi

Don ƙirƙirar salo, kuna buƙatar shirya gashin ku sosai kuma kare shi gwargwadon iko daga zafin zafi na curling baƙin ƙarfe. Don yin wannan, kuna buƙatar farawa tare da tsarkakewa na yau da kullun, wanda aka fi dacewa a cikin matakai uku ("Kulawar Gashi na yau da kullun - Asiri mai sauƙi"). Bayan an tsabtace gashi da kyau, ya zama dole don amfani da balm ko kwandisha don ƙirƙirar matsakaicin hydration da abinci mai gina jiki.

Cikakken bayani don maimaita gashin ku don kawai 96% na farashin. Iyakar abin bayarwa .. >>

Bayan wannan hanyar, ana amfani da samfurin kariya wanda ya dace da nau'in gashi ga gashi, wanda zai ƙirƙiri fim na musamman akan saman kowane gashi don salo mai saurin gashi tare da kwalliya suna riƙe da kyau. Hakanan zaka iya amfani da kayan aiki na musamman don ƙirƙirar curls, amma kawai mahimmancin da za a iya tunawa shine cewa a cikin kowane hali amfani da karfi idan gashi ya jike ko ma rigar daga samfuran salo ko bayan wankewa.

Da farko, wannan na iya shafar bayyanar da gashi sosai, amma sannu a hankali curls zai zama mara nauyi kuma ya lalace, ba za su iya riƙe kansu da kyau ba kuma mashin gashi na musamman ("Masks don bushe, curly da rashin tausayi gashi" na iya daɗewa ana buƙatar).

Zai fi kyau a yi salo mai zafi tare da karfi kawai don lokuta na musamman, kamar yadda kullun amfani da karfi mai ƙarfi na iya lalata lafiyar gashi.

Dabarar Curling Technique

Idan kuna son samun curls kamar yadda yake a cikin hoton da ke sama, to kuna buƙatar samun ƙwarewa, tunda kawai da wuya ake samun irin waɗannan muryar roba a farkon. Da farko kuna buƙatar shirya gashi, kamar yadda muka bayyana a baya, kuma wannan ba zai zama da wahala ba, musamman tunda an bada shawarar yin amfani da ɗabi'ar yau da kullun yana nufin dacewa da nau'in gashi. Bayan an sanya samfurin na musamman ga gashi, zaku iya ci gaba zuwa salo mafi dacewa da saƙar gashi.

Anastasia Sidorova yana da gashi mai ban mamaki. Koyaya, ba da daɗewa ba, yarinya ta yi fama da asarar gashi.

Da farko, gashi yana buƙatar rarrabu zuwa bangarori da dama ko sassa: ɓangarorin gefe, babba da ƙananan. Na gaba, kuna buƙatar ɗaukar tsefe na musamman a hannu ɗaya, kuma a ɗayan kwano, a baya mai tsanani zuwa zafin jiki da ake so. Ta amfani da tsefe, kuna buƙatar zaɓar wani maƙarƙashiya kuma a hankali a riƙe shi da karfi. Sannu a hankali, curl yana rauni, yana samar da curl daidai, kawai kuna buƙatar buɗe ɓoye kowane lokaci domin curls ya zama ba tare da kinks ba kuma ya kasance na roba da laushi.

Salon gashi mai zafi tare da fiɗa yana farawa daga bayan kai da maƙarar kusa da fuskar ya kamata ya zama na ƙarshe. Suna da alama suna kammala shigarwa kuma suna ba ku damar batar da ɗayan maɗauri. Bugu da ƙari, lokacin salo mai zafi lokacin rarraba gashi zuwa sassa, zaku iya amfani da shirye-shiryen bidiyo na musamman don wasu maƙamai, wannan ba zai haɗa gashi ba. Bayan an kammala salo, zaku iya amfani da kayan gyaran gashi wanda ke matsakaici don curls su riƙe elasticity da haske. Hakanan zaka iya amfani da abubuwa na halitta don salo na gashi ("samfuran gyaran gashi na asali").

§ 5. Salon gashi da karfi

Sanannen gashi (salo) na gashi tare da dusar ƙanƙara an san shi tun 1871. Gwanin gashi na Faransa Marcel ana iya ɗauka mai gano wannan sabon nau'in gyaran gashi.

Sunan wannan malamin yau ana kiransa da ƙurucin ƙarfe domin yin hotling mai zafi.

Muhimmancin sabuwar hanyar gyaran gashi yana da girma sosai cewa shahararren mai gyara gashi na Faransa Rene Rambault a cikin aikinsa "Curling Curls" ya kira buɗe Marseille "fasahar juzu'i ta yin gyaran gashi da salon gyara gashi".

A wancan lokacin, gashin gashi "akan tsefe" da "boules" ya zama ruwan dare gama gari. Amma har zuwa 1885, a cikin manyan biranen Turai, masu gyaran gashi sun fara amfani da murfin Marcel don yin curling. Tare da haɓaka kwarewar masu sana'a na gyaran gashi a cikin sarrafa sabon nau'in kayan aiki don kula da gashi gwargwadon hanyar Marcel, manyan dama sun buɗe har ma da kyawawan launuka na gashi.

A shekarar 1890, guguwar zafi ta fara yin nasara kan hanyoyin da aka sani a wancan lokacin.

A halin yanzu, arsenal na kayan gyaran gashi sun haɓaka ba da izini ba, amma har yanzu ƙarfi shine mahimman kayan aiki kuma mai mahimmanci ga mai gyara gashi.

A halin yanzu, ana amfani da harsuna na al'ada da na lantarki don curling mai zafi.

Lingarfin baƙin ƙarfe ya ƙunshi sassa uku: madaidaiciya tare da makama, tsagi tare da makama da fil a haɗa su. Thearnawa daga ɓangarorin biyu na murfin tare da fil ya rarraba su zuwa ɓangaren aiki da iyawa.

Kirkirar al'ada ba ta bambanta a cikin zane daga baƙin ƙarfen da aka fara amfani da shi a 1871 wanda mai gyaran gashi na Faransa Marcel ya yi. A halin yanzu, akwai ɗaukacin ɓangarorin ƙarfi waɗanda suka bambanta kawai a cikin diamita na sashin aiki. Fitilar su daga 10 zuwa 20 mm. Ana amfani da 'yan ƙwallon ƙafa tare da diamita na 10-14 mm don haifar da raƙuman ruwa (undulation) kuma don murɗa su cikin curls, tare da diamita na 14-20 mm - don kawai lalata gashi cikin curls. Don haka, ƙwayoyin katako tare da diamita na 10 zuwa 14 mm duniya ne.

Irin waɗannan ƙarfi ana yin su da baƙin ƙarfe na musamman mai zafi wanda ke ba da gudummawa ga tsayin daka na zazzabi da ake buƙata don gashi.

Tongarfin wutar lantarki suna da babban dila mai mahimmanci na ɓangaren aiki (20-25 cm), don haka ba za'a iya amfani dasu don duk ayyukan curling ba. Koyaya, suna iya yin salon gyara gashi wanda kusan basu bambanta da salo gashi akan curlers.

Gyaran gashi tare da dusar gashi mai wahala ne sosai kuma yana bukatar aiki. Yana buƙatar mai gyara gashi don sarrafa kayan aiki, hankali da kerawa. A yayin aiwatar da aiki da karfi, mai gyara gashi dole ne ya sami damar inganta, watau samo mafita na mutum a cikin kowane yanayi. Cikakken iko na kayan aiki babban aiki ne mai wahala, mafita wanda ke buƙatar wani lokaci da babban horo na tsari. Ba daidaituwa ba ne cewa a lokacin gwaji na ƙarshe na masu gyara gashi, ana ɗaukar gashin gashi tare da ƙwaƙwalwa shine mafi wuya.

Tare da ƙawan mai zafi, mai gyara gashi yakamata ya sami ƙarfe biyu. Wasu, riga mai zafi zuwa zafin jiki da ake so, suna sarrafa gashi har sai yayi sanyi, na biyu kuma a wannan lokacin ana ɗaukar mai akan mai ƙona gas ko injin injin. Ba za ku iya yin aiki da sabbin dabaru ba. Don amfani da su, ya zama dole don aiwatar da aikin shirya - sarrafa fat mai ƙarfi. A wannan yanayin, ana buƙatar mai da karfi a mai zafi a kan harshen wuta na mai ƙona wuta zuwa launin ruwan hoda-ja, sannan a saukar da su cikin jirgin ruwa tare da man ma'adinan, inda guguwar ta yi sanyi sosai da sauri (a cikin minti 1-2), to ya kamata a cire su daga mai kuma a shafe tare da ulu auduga. Daga wannan hanyar, ana shirya fim ɗin bakin ciki na ɓarnataccen mai a kan aikin daskararru. Wannan fim a nan gaba, lokacin aiki tare da karfi, zai kare faffadan yadudduka na gashi wanda ya kasance yana hulɗa da ƙarfi daga matsanancin zafi, yayin da a lokaci guda yana samar da ƙarin dumin ɗaki tare da ƙarfi na duka kauri na madaurin gashi.

Idan babu irin wannan fim ɗin man shafawa a cikin ƙarfi, za a iya ƙone gashin gashi da hulɗa da zafi. Idan irin waɗannan karfi suna mai zafi zuwa ƙananan zazzabi, to, gashi a tsakiyar maɗauri bazai dumama sosai kuma, sabili da haka, ba zaiyi ja da baya ba sosai.

Don haka, fim ɗin man shafawa a cikin abin toka kamar man goge baki ne, wanda ke rage zafin daskararrun ƙwaryar don kada ya ƙona gashi, kuma a lokaci guda, har zuwa wani lokacin yana taimakawa a kula da wani zazzabi na dogon lokaci.

Za'a iya tantance yawan zafin jiki na lokacinda ake gashi kamar haka: cire kwalliyar mai daga na'urar dumama, bude su, sanya kayan labarai tsakanin mai kaɗa da tsagi na ɓangaren aikin, ka rufe su.

Bayan 5-10 s, fitar da takarda kuma tantance yanayin. Idan babu alamun kwalliya a jikin takarda, to lallai suna buƙatar daɗaɗa su kadan, sannan sai a sake yin gwaji na biyu. Idan bayan dumama kwalliyar akwai alamar rawaya akan takarda, to ya kamata su daina yin ɗumi.

Takarda yana da maki mara nauyi, kuma a zazzabi na 130-150 ° C ya fara juyawa. Hakanan ana amfani da wannan ingancin takarda lokacin bincika zazzabi na dumama na ƙarfi, tunda yana daidai da zafin jiki na 130 ° C wanda shine mafi halatta don kiyaye gashi daga ƙona shi kuma ɗan kadan ya wuce zafin da ya wajaba don tabbatar da ingancin curling.

Hoto 46. ​​Babban matsayi na karfi a hannun

Zazzabi wanda takarda ya canza launin toka ya zama sama da yadda muke buƙata. Don haka, ya kamata a sanyaya kwas ɗin a ɗan kwantar da hankali. Yawancin lokaci akwai hanyoyi guda biyu don yin wannan. A farkon lamari, da samun bude dan karamin karfi a hannun dama, ya kamata a fyauce su a cikin iska na daƙiƙi da yawa, sakamakon abin da ya ɗauka mai ƙarfi na karfi zai gudano tare da iska mai yawa kuma asarar zafi zata kasance mai ƙarfi fiye da yadda aka saba.

Hanya ta biyu ita ce mafi ɗan rikitarwa, amma mafi inganci. Auki kwantena tare da hannun damanka ta hanyar riƙe, wanda yake ci gaba ne na abin da ke ƙarfe kuma, riƙe su a tsaye a buɗe, da sauri juya. Domin karfi ya sanyaya dan kadan, amma ba don kwantar da hankali ba, kawai juyin juya halin 8-10 na tsagi a kewayen hancin ya isa, bayan wannan zaka iya fara curling. Idan ana amfani da farin farin takarda domin sanin zafin jiki na karfi, ba jaridar ba, kuna buƙatar yin 20-25 na tsagi na ƙarfi a kusa da gundarin juyawa.

A wasu ƙasashe, ana yanke zafin jiki da yawan zafin jiki tare da ma'aunin zafi da sanyio. Amma wannan hanyar ba ta hali ba ce ga masu gyaran gashi, kamar yadda masana'antarmu ba ta samar da irin waɗannan ma'aunin zafi da sanyio ba. Koyaya, don bayani yana da mahimmanci don sanin cewa don daidaita gashin gashi na al'ada a cikin tsari, ana buƙatar gurnani, mai tsanani zuwa zazzabi na 110-120 ° C.

Don samun kyakkyawan ikon amfani da karfi, ya zama dole don haɓaka ƙwararrun ƙwararru, wato, don samun ikon riƙe ƙarfin a hannunka, da kuma sauƙaƙe da sauƙin juya su a cikin tafin hannunka duka a agogo da kuma agogo, yayin juji da sake buɗe sassan aiki.

Riƙe murfin hannunka na dama, kuma ikon murfin ya kamata ya faɗi a cikin tafin hannunka tsakanin yatsan yatsa da goshin ka. Ya kamata bangarorin masu aiki (tsagi da abin jujjuya) yakamata su kasance a gefen babban yatsa da yatsun hannu, tsakiya da yatsun zobe suna a waje da tafin hannu, da yatsa kadan a ciki, tsakanin iyakar su biyu.

Yayin aiki, tonon suna cikin motsi akai-akai, ana buɗe su, rufe su, suna juyawa a wannan lokacin agogo da kuma agogo.

Bude birgina tare da dan yatsan hannun dama na dama. Don yin wannan, en miƙe jigon, ringi da yatsunsu na tsakiya na hannun dama, sakamakon haka, za'a saki ƙananan murfin ƙarfi. Shin kana buƙatar miƙe waɗannan yatsun guda uku a lokaci guda?

madaidaiciya da ƙaramin yatsa. A wannan lokacin, kashi na farko na karamar yatsan ya kamata ya kauda kai daga ciki na rike hannun. A lokacin danna ƙananan abin hannun mai ƙarfi tare da ƙaramin yatsa, ana riƙe abin hannuwansu na sama ta babban yatsa na hannun dama.

Matsa murƙushe tare da juyawa baya na dukkan yatsunsu a mike. Babban nauyin ana ɗauka ta hanyar zobe da yatsunsu na tsakiya, wanda ke damun ƙananan hancin ƙarfi.Lokaci guda tare da wannan motsi, ya kamata a matse karamin yatsa zuwa dabino daga hannun don kada ya kawo cikas ga kamawa.

Lokacin kunna karfi a agogo da kuma kan agogo, than yatsa da goshin hannun dama na dama suna yin babban aikin. Wadanda basu da suna da tsakiya suna wasa na biyu.

A ce kana so ka juya abin toshe agogo a agogo (idan ka kalli abin tokar daga gefen aikinsu, za su juya ta kowace fuska). Bayan bada karfi zuwa matsayin farko, fara jujjuya su da manuniyar hannun dama, kuma latsa ma fi karfi a tafin hannu tare da yatsa na tsakiya. Yarinya da yatsunsu na tsakiya basu shiga cikin wannan motsi ba. Da zaran an buga abin hannu a kan tafin hannun kuma an saki yatsun, ya kamata a ja su zuwa wannan abin riƙe. A lokaci guda, matsar da babban yatsan hannun shi zuwa sabanin hannun wanda yake rike da shi ka fara juya shi ta agogo, sannan ka riƙe maɓallin tare da zobe da yatsunsu na tsakiya, yayin da ake ci gaba da jujjuya su a cikin shugabanci. A lokacin juya karfi da yatsun da kuma yatsunsu na tsakiya, manuniya ta riƙe hannun, ta 'yatsar yatsun hannu a cikin juyawa, kuma danna shi cikin tafin hannun. Thean yatsa a wannan lokacin yana motsawa zuwa ɗayan hannun na gaba. Don haka, ana sake maimaita yanayin motsawar yatsa.

Juya abin da ya shafi kwatankwacin aikin ana aiwatar dashi kamar haka: tare da tsakiya da yatsun zobe, riƙe albarbar daga tafin hannunka kuma riƙe shi da yatsa. Bayan wannan, matsar da babban yatsan hannun zuwa ƙananan hannun, juya shi ka matsa a kan tafin hannunka. Bayan haka, ana maimaita yanayin sake motsa yatsa.

Don haka, wajibi ne don koyon yadda ake aiki da karfi ta hanyar da za a iya samun sauƙin, ba tare da wani ƙoƙari ba, juya kayan aiki a kowane bangare, barin sashin aiki a rufe, sannan kuma a buɗe kuma a rufe su da juyawa. Ya kamata a horar da yatsun yadda ya kamata, tunda lokacin da ake canza gashi zuwa curls, ana buƙatar shawo kan babban ƙoƙari a cikin faɗaɗa ƙwayoyin.

Kuna buƙatar horar da yatsunsu kullun tsawon minti 40-60. Ana samun mahimmancin mahimmancin fasaha a cikin kwanaki 10-15. Bayan haka ne kawai zai yuwu a ci gaba kai tsaye zuwa goge gashi da curls.

Curl na curls

Kamar yadda muka rigaya mun sani, duk da yawancin nau'ikan samfuran salon gyara gashi, yawancinsu sun ƙunshi abubuwa na asali kamar raƙuman ruwa da curls. Waɗannan sune abubuwan da suke maɓalli a cikin salon gyara gashi. Canza bayyanar su ko matsayin dangi, suna canza kamannin yadda ake gyaran gashi.

Hoto 47. Hanyoyi don gyara gashi bayan murhu mai zafi a cikin yanayin wssled curls da rollers: a - salo daɗaɗɗen curl, b - adon ƙwanƙwashin gaban goshin, c - gyara ginin gashi mai lalacewa tare da aski, d - gyara tsintsiyar gashi mai aski, aski, e - sarrafa tsintsiyar yankin gashi a wuya, e - shiri don karkatar da ƙarshen gashin a cikin wani sabon gashi

Akwai salon gyara gashi da aka yi kawai tare da taimakon raƙuman ruwa ko curls. A cikin duka halayen, salon gyara gashi na iya zama kyakkyawa da asali. Koyaya, mafi ban sha'awa sune salon gashi wanda a haɗe suke da raƙuman ruwa da curls. Bambancin waɗannan abubuwan, da haɓakawarsu daban-daban a cikin fatar ƙyalli suna ba kowane salon gashi daban da halaye na musamman. Yana da matukar muhimmanci ga kowane mai gyara gashi ya sami damar haɓaka abubuwan mutum daban-daban tare da juna kuma a kan wannan shine aiwatar da kowane nau'in gyaran gashi daga mafi sauƙi zuwa mafi rikitarwa.

Hoto 48. Karkacewar nau'in kwalliyar kwalliya

Curls a cikin nau'ikan su sun kasu kashi da yawa: madaidaiciya (kwance), wani lokacin ana kiran su mai sauƙi, mai ɓoyewa, a tsaye, rugujewa, ƙasa, har ila yau ana layi daya a cikin layuka da yawa.

Hanyoyi madaidaiciya suna kwance a kwance. Idan suna cikin layuka da yawa a kwance (ɗaya a ƙasa da ɗayan), to irin waɗannan curls madaidaiciya ana iya kiranta layi ɗaya.

Manyan curls masu daidaituwa ba su da daidaici ko dai a kwance (a tsaye) ko a tsaye curls. A saman fatar kan mutum, yawanci suna a wani kusurwa na kimanin 45 ° a tsaye kuma a kwance.

Crumpled curls lokacinda aka sanya salon gyara gashi ta irin wannan hanyar da harsashinsu yayi kama da raƙuman ruwa, suna wucewa zuwa ƙarshen gashin gashi zuwa cikin curls.

Ana yin curls ne kawai akan tsayi (aƙalla 20-25 cm). Ofarshen waɗannan curls suna gangara cikin karkace.

Akwai hanyoyi da yawa don datse gashi zuwa curls: takwas, sama, ƙasa, da dai sauransu.

Kyakkyawan yanayi don kowane gashi mai gashi sune waɗanda gashi ya yi rauni a kan kayan aiki (ƙyallen, adda, bobbins, da dai sauransu) perpendicular zuwa gundarin jujin sa. Koyaya, wannan ba koyaushe zai yiwu ba. Don haka, alal misali, lokacin da ake datse gajeren gashi tare da abin ƙwanƙwasa sama ko ƙasa, ya zama mai yuwu koyaushe zai iya yin gashi zuwa kusoshin a ƙwanƙwasa zuwa ƙwanƙwasawa da abin da aka yi wa toron. Gashi yana ciwo kamar dai a yanayin karkace. Kuma aikinmu shi ne ƙoƙari don irin wannan yanayin iska, wanda nisan da ke tsakanin kowane juzu'i zai zama mafi ƙanƙantar, watau, kusanci da yanayin zobe. Ana iya cimma wannan ta hanyar haɗa gashi zuwa cikin curls tare da adadi na takwas. Sabili da haka, idan tsawon gashi ya ba da izini, ya kamata a yi amfani da wannan hanyar.

Don yin saƙa a cikin ƙawan, toyin ƙyallen a gindi kada ya wuce cm 4 In ba haka ba, gashin ba zai sami damar ɗauka zuwa ko'ina ba. A lokaci guda, makullin gashi kada ya kasance ya kasance mai bakin ciki sosai a gindi (laƙabin da ya fi 1 cm). Lokacin da zazzage gashi zuwa cikin curls, ya zama dole yin la'akari ba kawai kauri daga cikin kashin ba, har ma da tsawon sa: tsawon gashi da makin, mafi kauri ya zama lokacin da aka yi rauni a kan tokar. Sabili da haka, kuna buƙatar samun damar bambanta tsawon da kauri daga kashin. Duk tsawon lokacin da aka toshe gashin ku, siririn da gashi yake a gindin da kuke buƙatar ɗauka don kunsawa.

A takaice, alakar da ke tsakanin tsayin gashi da kauri lokacin da ake hada gashi zuwa curls kamar haka:

Duk wani gashin gashi yana buƙatar wani tsari lokacin da aka yi shi. Don haka, ya zama dole tun farkon horarwa don samun amfani da wani tsari.

Kafin a ci gaba da toshe gashi da karfi, ya zama dole a shirya kayan aiki da kayan da ake buƙata. Ba tare da la’akari da hanyar yin ɗumi mai zafi ba, yana buƙatar: tonganƙar biyu na diamita da ake buƙata, wutar lantarki don zafi da su (idan sanjin ba su da wutar lantarki), haka kuma ƙarfe ko ƙaho na tsefe, i.e. irin wannan tsefe wanda baya ƙonewa kuma baya narkewa saboda tsananin zafin jiki karfi. Lokacin rufe gashi a cikin curls, gashi na bakin ciki ko shirye-shiryen bidiyo kuma za a buƙaci don gyara kowane curl bayan curling. Don horo ko horo, ya zama dole don shirya kulle gashi tare da faɗin 15-20 cm.

Maimaita curls an samar da su kamar haka (la'akari da wannan hanyar gashi gashi a fagen horo). Amintar da gashin gashi tare da aski ko fil a kan takarda na musamman ko blank. Bayan haka yana da kyau a hada shi da tsefe, da farko tare da hakoran da ba a san su ba, sannan tare da maimaituwa.

Kafin ci gaba da juya gashi zuwa cikin curls, ya zama dole don ƙididdige yawan su da kuma tsari a kan maƙogwaron. Da ace muna so mu sanya curls hudu a jere a jere biyu, ɗaya a ƙasa ɗaya. Sabili da haka, a kowane jere akwai curls biyu. Bayan an ƙaddara adadin su da tsari akan kulle, zaku iya ci gaba da curling. -Aya daga cikin huɗu na jimlar adadin gashi ya kamata a rabu (tunda ya kamata a yi curls huɗu a kan duka maɓallin). Don yin wannan, da farko raba ɗayan dunƙulen zuwa sassa biyu ta hanyar girmansa, sannan kuma kowane ɗayan su sake a rabi, amma ba rigaya ya faɗi ba amma cikin kauri (farkon curl - babba na sama - dole ne a yi daga ɓangaren waje na gashi na kulle). Sa’an nan a hannun dama na ɗauki baƙin kwasfa mai zafi (har zuwa 110-120 ° С), kuma a hagun hagu - kulle gashi da aka yi niyya don curling. Lokacin da zazzage gashi cikin curls ,asa, ya kamata a kasance da murfin ƙarfe a kasan, kuma tsagi a saman.A wannan matsayin, dole ne a kawo rukunin tushe zuwa maƙarƙashiyar, wato, zuwa wannan wurin da ya kamata farkon ya kasance. A lokacin kama daga aiki na karfi na kashin gashi, dole ne a juyar da rukunin rabin zuwa gare ku, i.e. gungun tukwanen dole ne a juya su zuwa gindin gashi. Tare da wannan matsayin da karfi, za mu guje wa keta tarko a wurin da aka kama shi da karfi. Wannan matsayin baƙin ƙarfe wajibi ne a duk matakan yin gashi.

An kama kulle gashi tare da karfi kai tsaye a wurin da aka shirya sanya curl ko 1-1.5 cm mafi girma. Da zaran akwai gashi tsakanin tsintsiya da kuma mai kauri, sai a matse maɓarin murfin a hankali (amma ba gaba ɗaya) kuma ja da baya. Yayin gurnani, gashi ba kawai baƙin ƙarfe tare da baƙin ƙarfe mai zafi ba, har ma da ɗan dumama. Sakamakon haka, gashi ya zama filastik. Ya kamata a zana yatsun daga wurin da aka ɗauka kullewa a cikin wannan nesa wanda ɗaya ko biyu za'a iya yin su kuma saboda haka su sami yardar kaina ba tare da juriya ba. Bayan wannan, za a iya fitar da karfi a hankali don yadda iyakar gashi su kasance a tsakiyar tsakiyar. An tsayar da hotl ɗin mai zafi tare da shirin (clip) don kada ya yi sag a ƙarƙashin nauyin kansa.

Bayan kun gyara abin da ake so, za ku iya fara curls na gaba, da dai sauransu A lokaci guda, ya kamata ku kula sosai don tabbatar da cewa dukkan curls na layin farko suna kan layi ɗaya madaidaiciya (a kwance), kuma curls na jere na biyu suna ƙasa da su.

A cikin aikin yau da kullun, dole ne ku shirya curls a cikin tsari daban (dangane da salon gashi). Koyaya, a matakin farko na horo, ya zama dole don cimma daidaitaccen tsarin daidaituwa na curls.

Haɗa curls ya bambanta da hanyar da ta gabata na hada curls ƙasa tare da onlyan bayanai.

Babban bambancin shine cewa yakamata a jagoranci bututun zuwa maɓarnata, akasin haka, ya kamata tsumman su kasance a ƙasa, kuma abin hawa a saman.

A daidai lokacin da za'a kulle makullin gashi tare da fuka-fukai, dole ne a juyar da tabarau ta yadda babban tsani yake a gefen maigidan, kuma mai abin hawa yana gefen gindin maharbar. Sauran dabaru suna kama da waɗanda aka bayyana a sama. Ana kama wani yanki na gashi da karfi, kana bukatar ka juya su gaba daya, sannan ka fara kokarin fitar da darandin a inda ake sa warin da yakamata a girke. Yatsun hannun hagu a wannan lokacin suna riƙe ƙarshen gashin, yana jan su kaɗan.

Yanzu kuna buƙatar fitar da ɓangaren ɓoye na gashi. Don yin wannan, buɗe murfin dan kadan tare da ɗan yatsa sannan sai a rufe. Wajibi ne a maimaita waɗannan motsi koyaushe tare da isasshen hanzari, tunda a lokutan buɗewa da rufewa da ƙarfi, gashi ya fi rarraba a kan aikinsu, kwance a cikin kwancen kodayake, a ko'ina cikin dumama. Lokacin aiki da karfi, ana jin wuta da tazara akai akai. Mitar waɗannan sautuna suna taimakawa wajen ƙaddara matsayin ƙwarewar gashin gashi.

Wani lokaci yana da matukar wahala a ɗan buɗe fiɗa da ɗan yatsa kaɗan. A wannan yanayin, yatsan zobe yana taimakawa bude mabudin, kuma yatsa na tsakiya a wannan lokacin ya kamata ya zama yatsar zobe.

A cikin aiwatar da patting tare da karfi, ya zama dole a hankali a cire su daga tushe na kulle har wasu bangarorin gashin makullin da ba a aiwatar dasu ba har zuwa wani bangare na aiki na karfi (tsakanin tsagi da abin nadi).

Hoto 49. Curling curls up: a - tara wani yanki na gashi da karfi, b - An yi farkon farkon yatsun hannu (yatsunsu na hagu suna riƙe ƙarshen gashin gashin wutiri a wani wuri na siki)

Yakamata a cire abin da aka cire a cikin irin wannan nesa wanda zai basu damar komawa matsayin da suka gabata, wato, zuwa wurin makullin farkon gashi tare da cikkaken juyen. Sannan ya kamata a maimaita waɗannan motsi a cikin tsari iri ɗaya har sai an sami ƙarshen gashi tsakanin tsagi da abin nadi. A wannan gaba, bai kamata a sanya ɗan iska ba.

Gama ƙarshen curl kamar haka: duk lokacin da za a iya yin faci da ƙuruciya, a hankali juya su zuwa kanka don fuskantar curl har sai lokaci guda su ja da baya. Curling curls sama, ya kamata a sa su a kulle a cikin tsari iri ɗaya kamar lokacin da za a yi ƙasa.

Curling gashi cikin curls tare da adadi na takwas shine kamar haka (la'akari akan fagen horo). Sanya wata karamar gashi tare da tsawon aƙalla 20 cm akan blank ko matashin kai na musamman, sannan a haɗe shi har hakoran tsefe su ƙetare daga tushe daga makaman har zuwa ƙarshensa. Bayan an ƙididdige yawan adadin curls da matsayinsu a kan igiyoyi, raba kashi mai mahimmanci na gashi don warware curl ɗaya.

An raba bangarorin gashi a hannun hagu. Sa'an nan kuma, ana amfani da makullin mai zafi zuwa zafin jiki da ake so zuwa makullin. Gaggaren ɓoɓin na iya zama duka a sama da na ƙasa, gwargwadon hanya wacce zamu iya jan gola, sama ko ƙasa. Lokacin da curls rauni, tsagi yana can sama da abin hawa a ƙasa.

To, kamar dai lokacin da ake zub da gashi, tare da wani aiki na hancin, sai a kulle kulle gashi, juya rabin juyawa da kanta. Da zaran an kama kulle gashi da karfi, ya zama dole a hanzarta yin cikakken juyin juya hali tare da su, a dakatar da su a cikin wannan matsayin da cewa abin da ke juye da makullin ya juya zuwa gindin makullin da kuma tsagi zuwa ga maigidan. Hannun hagu a wannan lokacin dan kadan yana jan launin gashi, yana danna shi da karfi.

Daga nan sai a fitar da curl kamar yadda a lokacin da ake sare curls. Bayan dumama da igiyoyi akan duk kauri, cire karfi daga wurin da aka toshi takobin zuwa isasshen nesa kuma, in ya yiwu, sai a hanzarta yi gaba ta gaba da su.

A wannan lokacin, lokacin da karfi ya fara juyawa a hannun dama, ya zama dole a kawo karshen gashin gashi daga bayansa tare da hagu, kuma aka kirkiri mutum takwas.

Don haka, idan yayin juyin juya halin farko na karfi yana kare ƙarshen gashi, yana rufewa kusa da su, ya wuce gefen hagu na murfin, to yayin juyin juya hali na biyu ya kamata su wuce a hannun dama. Don haka, tare da kowane sabon juzu'in ƙarfi, ƙarshen gashi sun canza matsayinsu, kasancewarsu a hagu ko gefen dama daga gefen maɓallin murƙushe. Endsarshen gashin gashi koyaushe suna tsakiyar ɓangarorin aiki na karfi, wanda ke ba da gudummawa ga ingantaccen abu na curl. Dole ne a yi ƙarshen ƙarshen abin da ya yi daidai da yadda ake yin shi tare da sauran hanyoyin magance curls.

Bayan an karkatar da kulle daya, zaku iya fara yin na biyun. A wannan yanayin, dole ne a kama tarkon a daidai lokacin da na baya don kammala wannan layin kwance na curls.

Yawan curls tare da adadi na takwas an yi shi ne don ƙirƙirar magudanar ruwa ko lalatattun curls, tunda suna buƙatar madaidaicin tsawon gashi (20-25 cm ko fiye). Don barin curls kwance tsaye a cikin salon gyara gashi, yana bada shawarar sanya kwarkwana yayin da a hankali yake birgima. Hakanan ana iya aiwatar da curls tare da kwance layi na karfi, idan an yi curl akan dogon gashi (30 cm ko fiye). A wannan yanayin, za su rataye a cikin nau'i na karkace mai haske, wanda yayi kama da ban sha'awa sosai.

Hanya na gargajiya don ɗaure curls ya ɗan bambanta. A wannan yanayin, dole ne a riƙe murfin a tsaye, tare da ɗaga hannu zuwa ƙasa, kuma gashi rauni a kansu a cikin karkace. Hairarshen gashi a cikin karkace a kusa da ɓangaren aikin sashin an samo su ne a gefen kulle.

Baya ga duk hanyoyin da ke sama na curls curls da nau'ikan su, akwai kuma abin da ake kira curling of curllel curls a cikin layuka da yawa. Kuna iya aiwatar da waɗannan curls ta amfani da kowane ɗayan hanyoyin Curling. Ana shirya maƙarƙashiya don aiki daidai yake da kowace hanya.

Idan lokacin da ake canza gashi a cikin curls, to tilas ne a lura da abin da ya yi daidai, to lokacin da ake kira curllel curls, wannan yanayin shine babba.Lokacin aiwatar da ƙwarewar a cikin wannan nau'in curl, ya zama dole a sanya aƙalla layin kwance uku a tsaye a kan tambari (curls uku a kowane layi).

Bayan an bayyana wurin kowane curl da kuma haɗa kulle, zaku iya ci gaba da warware shi. An samar da daidaituwa na curls yayin mafi yawan lokacin da aka kama sashin aiki ta hanyar karfi daga sashin farko na gashi. Kari akan haka, ya zama dole a tabbata cewa lokacin da ake sarrafa kowane curl, nisan da za'a ja kwalin kwatankwacin iri ɗaya ne akan kowane curl. A karkashin waɗannan halayen, za a tabbatar da daidaituwa na curls.

Hoto 50. Tsarin curls a cikin salon haila: a - shiri na occipital kulle na gashi don duwaɗa a cikin wani curl, b - tsara ƙwanƙwasa ta hanyar haɗuwa, c - gyara ginin curl tare da aski, d - shiri na kulle gashi a goshi don curl zuwa curl

Curling duk layuka na layi daya ya kamata a yi kawai a ɗayan hanyoyin da aka zaɓa. Da zaran an gama layin farko na curls gaba daya, zaku iya fara datsa layi na biyu. Kowane jerin layi na gaba ya kamata a kasance a ƙarƙashin wanda ya gabata ba tare da gatanci tsakanin su ba.

Ko da kuwa hanyar yin amfani da gashi a cikin curls, an yi su ne ta hanyar iri daya. Sabili da haka, zamuyi la'akari da taƙaitaccen hanyoyin gama ado na curls.

Kuna iya fitar da curls ne kawai bayan sun bushe gaba daya. Bayan haka zaku buƙatar ɗauki babban abin hagu a hanun hagu, ku daidaita shi ku hada da tsefe, na farko tare da hakora masu saukin ganewa, sannan kuma tare da m.

Domin curl ya zama na roba da lush kuma ya kasance ya fi tsayi, an narkar da shi daga gefen kulle wanda zai zama na ciki. Bayan haka, sanya curl tare da ciki a cikin tafin hannun hagu, kuma a hannun dama ka ɗauki goge na musamman na gashi ɗanɗano da man shafawa na man petroli da brioli, kuma a haɗe sashin waje na curl da shi. Bayyanar ya dogara da ingantaccen haɗawa daga ɓangaren micin kulle.

Za ku iya juya murfin bisa ga irinsa tare da yatsun hannayenku biyu ko yatsun hannun hagu da ƙarshen tsefe tare da wutsiya.

Wave

Wannan nau'in curl a cikin tsarin gyaran gashi ana aiwatar da su ne ta hanyoyi biyu: akan kanka da kan ka.

Hanyar da za a cire gashinku ya fi wahala. Koyaya, ikon yin amfani da shi a cikin aiki yana buɗe ƙarin damar don yin salon gyara gashi iri-iri. Wannan hanyar mai mahimmanci yana da mahimmanci musamman lokacin yin babban salon gyara gashi, wanda igiyar igiyar ruwa ke gudana tare da gefen gashin gashi na gaba ɗayan fatar kan mutum. A irin wannan salon gyara gashi, dole ne a haɗu da duk gashin gashi, zuwa ga kambi ko ɓangaren parietal. Wajibi ne don aiwatar da raƙuman ruwa daga gefen haɓakar gashi a hankali, kalaman bayan kalaman, yana tashi sama. A wannan yanayin, kusan rabin aikin duk ana yin su ne da kansu, kuma kashi na biyu ana yin aikinku.

Yin amfani da hanyar ku, ya kamata ku fitar da gashin da ke gefen occipital da gefen gefen kai a bayan kunnuwa. Tabbas, zaku iya yin gyaran gashi ta wata hanya don kanku. Koyaya, wannan ba a yarda dashi ba, saboda zai iya gashi gashi a wani yanayi mai rashin dacewa ga abokin ciniki.

Idan yayin aikin gashi zuwa cikin curls babban aikin ana yinsa ne da hannun dama, a cikin abin da aka sami taruka, kuma tare da taimakon hagu, to idan an yi gyaran gashi tare da raƙuman ruwa tare da hagu, ba za a ƙara yin wasu ayyukan mahimmanci kamar na tare da hannun dama ba. A hannun hagu shine kullun tsefe, wanda tare tare da karfi suna samar da taguwar ruwa.

Ya kamata a karɓi tsefe a hannun hagu tare da wata dabara wacce goshin ta ke fuskantar dabino. Sanya yatsa da yatsa kaɗan a gefe ɗaya na tsefe, sauran kuma a ɗayan. Lokacin juyar da haƙoran tsefe zuwa maigidan, matsa babban yatsa zuwa gefen gefen gefen sa, kuma yayin juyar da hakora a gefe guda, zuwa ƙarshen hakora. Wannan motsi na yatsun da combs dole ne ayi aiki dasu a sarari. Yana da matuƙar wajibi don madaidaicin kulle gashi wanda aka yi niyya don curling.

Sabili da haka, kafin a ci gaba kai tsaye zuwa murfin kulle gashi tare da raƙuman ruwa, kana buƙatar yin ma'amala tare da tsefe. Yayin wannan motsa jiki, ɗauki tsefe a hannun hagu. Ya kamata a shirya shiri da gashi. To, matsar da babban yatsan hannun hagu a cikin hancin hakora, juya shi daga gare ku. A wannan matsayin, kawo tsefe zuwa gindin gashin ku kuma saka hakoran tsefe a ciki. Koyaya, yakamata su ƙetare dukkan zurfin maɓallin.

Don kama gashi tare da motsi mai sauri, matsar da yatsa zuwa gefen kwas ɗin tsefe, don haka juya shi zuwa gefe kan kanta. A wannan lokacin, dan ƙara faɗaɗa hannun hagu domin hakoran tsefe ba su da daidaituwa da janar na gaba na gashi. Don haka, gashin da ke kwance akan hakoran gashi ba za su iya fitowa daga gare su ba a lokacin tayar da makullin gashin da za a kama da karfi.

Bayan kun kama kulle gashi tare da tsefe, ɗaga shi da 2-3 cm kuma ku kawo kumbon (yakamata a juya kan maigidan, kuma ya kamata a juya mai juyi zuwa gindin makullin). Hannun muryoyi suna kwance a kwance a cikin tafin hannun. Yakamata a kawo rukunin sashi na gashin gashi da ke tsakanin 1.5-2 cm sama da tsefe, wanda ke tallafawa maƙarƙashin a cikin ɗan ƙara girman matsayi. Sannan juya dan kadan zuwa wurin ka domin saman babba na tsagi ya zama sama da yadda ake juya shi. Bayan buɗe muryoyin, matsar da su cikin gashi tare da hannun dama na hagu domin gashin ya kasance tsakanin tsagi da abin birgima. A hankali matsi na kulle gashi tare da karfi a nesa daga 1.5-2 cm daga tsefe, cire sashin aikin mai aiki zuwa tsefe. A wannan lokacin, kwance cikin karfi zuwa matsayin aiki, i.e., tsagi a cikin jagorancin maigidan, da kuma abin birgima a cikin tushen ginin murfin. Yakamata a gama juyayin kafin lokacin da suka taɓa tsefe. Lokaci guda tare da juyawa da ja, a hankali ƙara matsa ƙarfi da ƙarfi don zuwa matsayi na farko, i, shine, tsefe, ya fi girma. Lokaci guda tare da zana, juya da ɗauri matsawa, tura turaruna dan kadan zuwa gefen layi na dama zuwa kan layi na juyawa.

Yunkurin da aka samu na ɓoye na madaidaiciya zuwa gefen madaidaiciya zuwa mahallin su na faruwa a lokaci guda tare da motsin tsefe zuwa hagu, haka kuma yana da layi ɗaya da juyawar abin da aka yi da tonon, amma a kai shi gefe. Zai biya diyya daga abin da ake harba da gashi da karfi zuwa hannun dama ta hanyar gudun hijira daga hannun hagu. Saboda haka, janar na gashin gashi kusan ya kasance kullun. Sakamakon irin wannan motsi da aka samu na kwarin da tsefe, ana kafa layin taguwar ruwa. Kar a rikita rawanin rami tare da tsakiyar sashi. Kambi ne iyaka (layin) tsakanin raƙuman ruwa biyu, da kuma tsakiyar ɓangaren raƙuman ruwa (kamar dai layin da ba a gani ba) ya shude a inda gashi a cikin igiyar ke canza alkiblarsa.

An kafa kambi a daidai lokacin da karfi ya hadu da tsefe. A wurin da aka kafa kambi, sai gashi ya canza allon ta koma akasin haka. Sai ya zama layi mai laushi (tsinkaye) na raƙuman ruwa, bayan da an gama cikakken farashi. Dole ne in faɗi cewa rawanin kansa muhimmin abu ne a cikin salon gashi. Saboda haka, lokacin horo kan kama kulle gashi tare da gamsassun abubuwa, ba za ka iya barin matsayin rawanin a kulle ya canza koyaushe ba.

Hoto 51. M shugabanci motsi na karfi da tsefe a lokacin samuwar da kambi

Anan kuna buƙatar fitar da daidaito.

Curling gashi a cikin raƙuman ruwa ya ta'allaka ne akan cewa tsarin aiki ta wannan hanyar yana zuwa ga kanka, wato, ga maigida. Yin sarrafa kowane motsi, abin ɗamara da kwandon dole ne a jawo su koyaushe daga gindin murfin zuwa ƙarshensa.

Samun horo a kan maɓallin horo, dole ne a fara kwafa shi.

Sannan sanya zafi a cikin zazzabi.

110-120 ° C kuma bincika yanayin dumama na murfin aiki kamar yadda aka san mu. Daga nan ka ɗaga kulle gashi da gamsai ka ɗora shi da ƙarfi, ja shi har sai an kafa kambi naɗaɗa.Da zaran an taɓa taɓa tsefe, suna buƙatar a juya su kaɗan, suna kiyaye janar na murfin. A lokacin cire tsefe a gaba tare da tarkon, ƙarin haɗuwa yana faruwa. Sakamakon haka, gashi ne mafi kyawun rarraba akan farfaɗo, wanda ke ba da mafi kyawu kuma mafi kyan gani.

Hada gashi daga kambi na kalaman ana aiwatar dashi. kamar haka: bayan an kunna ɗan ƙarfi, ya taɓa tsefe, ƙaramin sashi na kulle daga kambi ya ci gaba ta hakora. Sakamakon haka, tsefe bai daina kasancewa a kambi kansa ba, amma ya ɗan ɗan rage kaɗan. Domin tara wannan sashin gashi a wasu lokuta da yawa, ya kamata a juya tabo a wani bangaren, kuma ya kamata a mayar da tsefe zuwa kambi. Daga nan sai a sake murza kwano da tsefe.

Da zaran an aske sashen gashi daga kambi har ya isa sosai, zai yuwu a tsinci murfin. Don yin wannan, dole ne a goge gashin gashi tare da tsefe, kuma yakamata a cire ɓarnatar kuma a canza shi ta rawanin. Za'a iya ɗauka na gaba na kulle gashi a duka kambi na farko a ɗaya gefen, kuma a tsakiyar ɓangaren motsi na gaba, kazalika kai tsaye a kambi na gaba. Tunda duk waɗannan hanyoyin suna ɗan bambanta da juna, ana ba da wasu bayanai game da kowannensu a ƙasa.

Da farko, muna buƙatar kama kulle gashi kai tsaye daga kambi na farko. Don yin wannan, zaren goge gashi dole ne a goge shi da tsefe wuri guda wanda muka bar shi, yana buɗe kwano. Tsefe a wannan lokacin shine 2-3 cm daga kambi. Daga nan sai a juya turarrrrrrrrrrrrrrrrrrrcirciƙƙyar '180' 'don tsaransu suna fuskantar tushen murfin da maɗaura zuwa maigidan. A wannan matsayi, buɗe murfin dan kadan kuma, wucewa ƙulli na gashi tsakanin tsagi da mai ɗauri, kawo su zuwa kambi. Wajibi ne a tabbatar da cewa ƙwanin rawanin yana daidai da kwano kuma baya shiga sashin aiki. In ba haka ba, kambi zai karye kuma layin taguwar ruwa ya karye.

A daidai lokacin da maigidan ya fara damfara sassan aikin, zai zama wajibi ne a fara ciyar da su gaba da hanyoyin juyawa zuwa hagu. Wannan motsi na karfi yana da matukar muhimmanci, saboda godiya gareshi, yana yiwuwa a tabbatar da fitar da gashi mai kyau daga kambi zuwa rami. Lokaci guda tare da motsin igiyoyi zuwa hagu da ke layi ɗaya da hagujensu na juyawa, tsefe yana motsa kulle gashi zuwa hannun dama. Wannan motsi na tsefe yana ba da isasshen lanƙwashin layin igiyar ruwa kuma an sa alama a kan kambi na gaba. Don haka, tabo da tsefe suna juyawa a cikin shugabanci. Yunkurin tseɗuwa kuma yayi daidai da ƙudurin juyawa da ƙarfi.

Don nazarin rawanin daga gefen tsefe kada ya kasance. Da zaran an fitar da kambi na gaba, zaku iya kwance karfi da ƙarfi, kuma ba tare da cire su gaba ɗaya daga cikin kulle ba, matsa zuwa tsakiyar sashin da aka kafa. A lokacin motsi da karfi a saman kalaman daga kambi, dole ne a juya su 180 ° domin a sami wani abin hawa na karfi a gefen gindin murfin, kuma wani tsagi a gefen maigidan. A wannan matsayin, ana shirye don amfani. Suna buƙatar ɗaukar wani yanki na gashi a wannan sashin shi inda igiyar, keɓaɓɓu, ta canza alƙawarin (wannan kusan a tsakiyar tsakiyar igiyar). Ja dayan dunƙule, ba ya isa 1-2 mm zuwa layin kambi na gaba. A wannan wuri, gashi yana buƙatar yin aiki da kyau, yayin da ake haɗuwa da sashi na gaba na abin toshe gashi tare da tsefe, kamar yadda aka bayyana a sama.

Bayan an aiwatar da kambi na kalaman har ya isa sosai, yana yiwuwa a ci gaba da aiwatar da raƙuman ruwa mai zuwa, lura da tsari iri ɗaya, in ban da aiwatar da igiyar ruwa ta ƙarshe. Wannan fasalin shine kamar haka: a cikin mafi kyawun yanayi, girman raƙuman ƙarshe ya kamata ya zama iri ɗaya kamar raƙuman ruwa a kan duka tataccen gashi. Koyaya, a aikace, ba shi yiwuwa a lissafa lamba da girman raƙuman ruwa gaba ɗaya tsawon tsawon murfin. Sabili da haka, lokacin aiwatar da gashin gashi na ƙarshe, kuna buƙatar ganin yadda ya dace da ɗaukar hoto na hairstyle gabaɗaya.Wajibi ne a yi ƙoƙari don tabbatar da ƙarshen ƙarshen gashin raƙuman ƙarshe sun shigar da kambi na igiyar a tsakiyar maɓallin. Don yin wannan, bayan aiwatar da kambi na ƙarshe a bangarorin biyu na kashin, canja wurin murfin zuwa tsakiyar tsakiyar igiyar ta hanyar da muka riga aka san mu. Bayan haka, ta hanyar yin jigilar abubuwan ƙarfi, cire su zuwa ƙarshen maharbin tare da motsi wanda zai maimaita layin da ake so. Dole ne a ci gaba da yin amfani da karfi har sai lokacin da gashi na ƙarshe na kaset su fito daga bangaren aikin su.

Dole ne a yi amfani da ƙarshen gashi ta wannan hanyar, in ba haka ba, a kan asalin ɓangaren gashi na gashi, za su bayyana kai tsaye, sabili da haka yana rufewa. A kan * wannan, ana aiwatar da tsarin fifita gashi tare da raƙuman ruwa na maza. Koyaya, zaku iya datse gashinku cikin raƙuman ruwa ba tare da wani mutum ba. Bugu da kari, wani lokaci ya zama dole don samun layin kaifi mai kaifi.

Don samun layin kaifi mai kaifi, ya zama dole idan ana aiwatar da abu na biyu (daga tushe na kulle) kambi don yin cikakken jujjuya na ƙarfi daga kanta kuma a ba da lokacin dumama madaidaicin farin gashi. Ana ɗora wutar murfin, toshe igirorin su buƙaci a ɗan juya kansu da kuma nisanta kansu (a manne su), kuma a haɗu da gashi a hagu tare da tsefe. Don haka, ana sarrafa kowane kambi.

Wannan hanyar hana taguwar ruwa ba tare da layin maza ba ya bambanta sosai da hanyar hanyar cudanya da saurayi. Babban bambanci shine cewa ana sarrafa gashi kai tsaye a kambi a garesu daga ita. Ba a sarrafa tsakiyar tsakiyar igiyar ba tare da karfi ba. Tare da irin wannan raƙumin ruwa, layin taguwar ruwa ya fi na halitta, amma ƙasa da dorewa.

A cikin karatun sakandare na raƙuman ruwa, ana amfani da wata hanyar warware gashin da ƙwace ta kama daga kambi don cikakken juyin juya hali. Lokacin aiwatar da kowane motsi mai zuwa tare da tsefe, ya zama dole don ɗaukar ƙarin gashi daga ƙananan yadudduka. A lokaci guda, tsayin gashi yakamata ya zama kaɗan a kowane ɓangare na salon gyara gashi.

Ni kaina na fara gashi wajibi ne yayin yin wasu salon gyara gashi. Wannan hanyar gyaran gashi shine kamar haka. Hada tserarrun gashi a sama idan an haɗe shi da komai. Koyaya, don aiwatar da ƙwarewar farko, ya fi dacewa a yi amfani da matashin kai na musamman, tunda ana iya sanya tarko a sararin samaniya kuma saboda ginin yana fuskantar maigidan. Bayan haka a hankali a harhaɗa da maɗaurin tare da tsefe, na farko tare da manyan hakora, sannan tare da ƙananan. Bayan haka, zaku iya ci gaba kai tsaye zuwa curl. Wannan hanyar magana tana kama da hoton madubi na hanyar curling akan kanka. Wannan yana nufin cewa idan muka kalli madubi yayin da muke jan gashi a wata hanya ta kanmu, zamu ga daidai irin wannan motsin da aka samu yayin da ake hana gashi ta wata hanya daga kanmu. Hannun hagu da dama suna yin aiki iri ɗaya, duk da haka, ana juyawa motsin su gaba da waɗancan ƙungiyoyi waɗanda aka yi tare da hanyar curling na farko. Sabili da haka, kawai ya zama dole don haɓaka automatism na hagu da hannun dama.

Hanyoyi don haɓaka yanki na gashi da aka yi nufin curling, kazalika da sarrafa raƙuman kambi suna kama da waɗanda aka bayyana a sama.

Lokacin da aka kulle makullin gashi da toshe, bai kamata mutum ya manta cewa yakamata a ɗan juya su zuwa ɓangaren dama zuwa ga abin da ke juyawarsu ba, kuma tsefe yakamata ya kulle gashin kursi hagu. Wadannan motsi suna da matukar mahimmanci don samuwar kambi da raƙuman ruwa.

A ƙarshen sarrafa kambi na farko, kuna buƙatar tsagaita ƙarfi kuma ku ci gaba da sarrafa ƙirar gashi a ɗayan hanyoyin da aka zaɓa.

Babban bambanci mafi mahimmanci, hakika, a wannan yanayin zai zama motsi na kugu da tsefe kanta. Kamar yadda ake sarrafa igiyar ruwa daga kan teburin, tokar za ta rabu da tushe daga dutsen har zuwa ƙarshensa. Tare da hanyar curling, toshewa da tsefe suma suna motsawa daga gindin din murfin zuwa ƙarshen, duk da haka ana motsa wannan motsi a wurin maigidan, kuma tare da hanyar daga kansa, daga maigidan.

Wig gashi gashi

Wig yana da mahimmanci azaman kayan horo don haɓaka ƙwarewar aiwatar da salon gyara gashi daban-daban. Amma lokacinda ya fara cire wig, ɗalibin yakamata ya kasance yana da kyakkyawan umarnin ofanƙwasa kuma ya sami ikon aiwatar da dukkan abubuwan curl da suke gyara gashi. Wig curl workouts shine sashi na ƙarshe na aikin horo na curl mai zafi, bayan wannan ɗalibin dole ne ya zama yana bawa abokan ciniki kai tsaye. Sakamakon haka, lokacin da ake warware gashin wig ɗin, ya zama dole a fitar da abubuwan da kansu ba waɗanda suka theaunatar da gashi ba, amma tsarin raƙuman ruwa dangane da gira, ɓangaren idanun da sauran sassan fuskar. Bugu da kari, lokacin cire gashin wig, kwarewar tilas takan yi aiki, wanda zai kawar da raunin cutar sikirin abokin har da karfi mai zafi.

Kafin fara aiki kan sarƙar gashin gashi, ya zama dole a yi tunani game da nau'ikan gyaran gashi na gaba, tunda dogaro da nau'in asirin, yawan taguwar ruwa, curls, matsayin su a cikin salon gashi, gami da kasancewa ko rashin rabuwa sun ƙaddara.

Don dalilai na ilimi, galibi ana amfani da daidaitattun wigs. Saboda gaskiyar cewa kowane abokin ciniki yana da halaye na mutum a cikin nau'i na kai, siffar fuska da m, yawan gashi, da sauransu, ya zama dole don aiwatar da nau'ikan hanyoyin gyara gashi a kan wig. Za'a iya raba gashin gashi kuma ba tare da rabuwa ba. Ya danganta da siffar kai, siffar fuska, yawa da gefen girma gashi, har ma da launi na gashi, raƙuman ruwa na iya zama ƙanana ko babba. Yawan fuskoki (zubuwa) taguwar ruwa na iya zama 2, 3 ko fiye.

Hairstyles tare da raba kai tsaye da gefe na iya zama tare da madaidaiciya (daidaici zuwa rabuwar) kuma tare da guguwar (a wani kusurwa zuwa rarrabuwa) raƙuman ruwa.

A cikin rarraba gashi, fuskokin fuskoki a garesu yawanci alama ce. Zaka iya yin salon gyara gashi tare da raƙuman ruwa masu motsi guda biyu (na gaba da na lokaci), buɗe kunnuwa. Gashin gashi yana iya kasancewa tare da raƙuman ruwa masu tasowa guda uku: na gaba, na lokaci da fuska. A wannan yanayin, raƙumin ƙarshe, na gaba, yana rufe abin da ke da matsala (idan kowane motsi yana da faɗi na matsakaici, a cikin yanayin ƙananan raƙuman ruwa na ƙarshe bazai rufe kunnuwa gaba ɗaya ba).

A cikin salon gyara gashi tare da rabuwar gefe, yawan raƙuman haɓakawa a gefe ɗaya ya dogara da adadin taguwar haɓakawa ɗayan. Idan za a yi amfani da igiyar ruwa uku masu aiki a daya gefen rabuwa, to yakamata a sami biyu daga cikinsu. Idan a gefe guda akwai raƙuman ruwa biyu masu haɓaka, to a ɗayan ɗayan ya kamata ya kasance akwai tsayayyen tsawa guda ɗaya.

Hannun gashi tare da rabuwar gefe na iya kasancewa tare da raƙuman ruwa madaidaiciya a ɓangarorin biyu na rabuwa, tare da raƙuman gabbai daga bangarorin biyu, gami da raƙuman ruwa na gefen babban ɓangaren rabuwa da madaidaiciya kan ƙananan. A gefe mafi girma, raƙuman farko na iya zama gaban ko baya. Ya danganta da adadin raƙuman ruwa, ana iya buɗe kunnuwa (raƙuman ruwa biyu a gefen dayan kuma ɗaya akan ƙarami) ko rufe (uku akan babba da biyu a kan karami).

A duk salon gyara gashi tare da bangarori, kawai waɗanda igiyar ruwa waɗanda suke da jagora guda ɗaya ya kamata a haɗa su a bayan kai: har ma a gefe guda kuma wari a ɗayan. Ya kamata a yi amfani da layin walƙiya a kusa da kambi ko a ƙarshen rabuwar a cikin zangon daidai a nesa daga rawanin don kambi ya kasance tsakiyar tsakiyar zangonsa. Yi aiki a kan wannan layin kawai tare da ƙarshen baƙin.

Gashin gashi ba tare da rabuwa ba na iya zama tare da raƙuman ruwa da ke tare da raƙuman ruwa daga fuska, tare da buɗe ko kunnuwa, ko kuma asymmetrical.

A cikin salon gyara gashi tare da raƙuman ruwa masu motsawa Da farko kuna buƙatar yin “kambi” kuma kawai a kusa da shi tare da ci gaba da layi don jan raƙuman ruwa. Raƙuman ruwa a kan kambi na kai da kambi ya kamata ya faɗi da fuska fiye da fuska. A irin wannan salon gyara gashi, raƙuman ruwa na iya zama a haɗe biyu a ɓangarorin biyu dangane da wurin da aka ba da shawarar rabuwar ko kuma a ɗan juya shi gefe ɗaya. A wannan yanayin, a gefe guda za'a iya samun raƙuman ruwa ɗaya fiye da ɗayan.Idan “rawanin” yana gefen hagu na rabuwa, to, adadin igiyar ruwa zai kasance a hannun dama, kuma haka.

Hairstyle tare da raƙuman ruwa daga fuska ana bada shawara ga mutanen da ke da kyakkyawan layin gaban goshi. Idan isharar gaban goshi mai zurfi ce, wannan shine, akwai alamun facin mai zurfi, to ba a bada shawarar irin wannan salon gashi ba. Ya kamata a aiwatar da waves daga fuska daidai gwargwadon rabuwar kai tsaye da ake zargi. Hakanan ana yin kambi a gefen gaban gaban goshi, duk da haka, zahirinsa yana da faɗi sosai. Layin "kambi" sannan yana tafiya da layi ɗaya zuwa gefen haɓakar gashi. Don haka, ana yin layin farko na igiyar rufe kunne. Layi na biyu na wannan igiyar (kambi) a daya gefen shine layin farko na igiyar gaba, anan shi ma ya rufe kunne. Wannan salon gyara gashi yana da kyau musamman idan gashin saman saman yana tara a bun da aka sanya cikin curls.

Dukkanin hanyoyin salon gashi da aka lissafa, dangane da tsawon gashi, ana iya gama su ta hanyoyi daban-daban. Sabili da haka, alal misali, tare da gajeren gashi, zaku iya yin dukkan salon gashi a cikin raƙuman ruwa. Daga matsakaiciyar tsayi, gashin gashi na iya haɗu (gaban - raƙuman ruwa, baya - curls), tare da dogon gashi, mafi yawan ɓangaren gashi yana ta birgima, kuma gashin gashin bayan an sa shi a cikin bun.

Curling gashin wig, kuna buƙatar fitar da dabaru daban-daban don yin ɗakin lebur da raƙuman ruwa mai zurfi. Don samun taguwar jirgin sama, ana yin curling ba tare da layin mutane ba. A wannan yanayin, a lokacin haɓaka kambi na taguwar ruwa, ya kamata a tura ɓoye daga wajan kansu ko zuwa kansu kamar yadda zai yiwu. Lokacin kunna karfi, ya zama dole a dakatar da su a cikin wannan matsayin cewa babu wani abin rufe gashi. Don haka, don samun raƙuman jirgin sama, ana yin aikin rawanin raƙumi tare da ƙaramin ƙarfin ƙarfi.

Don yin raƙuman ruwa mai zurfi da aka bayyana, juyawar karfi yayin aiki da kambi ya zama babba-wuri. Na farko lura da raƙuman ruwa ne da za'ayi kamar yadda aka bayyana a sama, yayin da sakandare magani kuma yana buƙatar fitar da ƙananan matakan gashi. A wannan yanayin, raƙuman ƙananan yadudduka dole su dace daidai da raƙuman ruwa na babban Layer. Kuna buƙatar fara sarrafa sakandare kamar haka: yi aiki da kambi na farko daidai kamar yadda aka fara aiki. Bayan haka, lokacin da abin da ya kawo karfi bai isa ya toshe wani kambi na gaba ba, sai a hada kunun babban gashi da na babba. Lokacin da ɗan ƙaramin abu ya ɗaga, da tashin hankali na gashi ya ɗan raunana (i.e., a taimaka musu su ɗan ɗanɗano bazara) ta matsar da tsefe zuwa gindin murfin. A sakamakon wannan motsi, layin taguwar zai yi kaifi sosai kuma wannan zai taimaka wajen kama tarko tare da karfi a daidai wurin da aka yi niyya. To kawo zobe a kambi domin wannan aikin shi yana saman kuma tsagi yana kan kasa. A wannan yanayin, tsintsin tsintsiya don ɗaukar kamannun gashi da juya kullin, kuma yayin yin dukkan motsin dole a wannan yanayin tare da gams da tsefe. Yi aiki da rawanin a ɓangarorin biyu, sannan ci gaba zuwa kambi na gaba. Lokacin da kake haɓaka raƙuman ruwa masu biyo baya, kana buƙatar tabbatar da kullun cewa hagu tare da tsefe baya tayar da gashi sama da yadda yake mahimmanci don kamo su da ƙarfi. Dole ne a lura da wannan yanayin don haka lokacin da ake tsara salon gyara gashi, raƙuman ruwa na saman yadudduka na gashi sun hadu da ƙananan.

Don yin nazarin gashi a kan dukkan kauri na zaren, zaku iya amfani da wata dabara. Rarrafa gashin da aka yi aiki da tsefe sai a jefa shi gaba, yayin da ƙananan keɓaɓɓun zai buɗe kuma ya zama mafi sauƙin shiga don curling. Don samun layi mai zurfi, wani lokaci ana amfani da wata dabara wacce raƙuman ruwa zasu gan ta cikin zurfi. Ana samun wannan ta hanyar rage yaduwar igiyar: mafi karamar igiyar, mafi zurfin zurfinsa zasu yi kamar Ana ba da shawarar wannan dabara musamman lokacin da ake yin laushi da gashi.

Hoto 52. Manyan salon gyara gashi daga dogon gashi, wanda aka yi da faranti a wani yanayi na gargajiya

Don haka, don samun layin zurfafa mai zurfi, wajibi ne don fitar da gashi don duk kauri na dunƙule tare da mafi girman juyawa na karfi.

Lokacin aiwatar da raƙuman ruwa tare da karfi, matsayin da yake a dunkule ya zama daidaituwa da saman kai, wato, wannan ɓangaren kan wanda muke gashinsa muke aiki. Lokacin aiki fitar da “kambi”, wannan yanayin ya canza kadan. An shirya rukunin karfi a wani lungu da kafaɗa saboda ƙarshen ƙarshensu kawai ya shiga aikin. Bayan haka, kawai iyakar karfi zai iya fitar da kaifin lankarwan “kambi”. Abin da ya sa dole ne ka yi amfani da ƙarshensu. Ya kamata a sarrafa kambi a cikin kananan strands. Girman maɓallin gashi a cikin kowane yanayi na iya bambanta. Dukkanta ya dogara da wane "kambi" a cikin girman muke buƙatar aiwatarwa. Karamin yadudduka na “kambi” semicircle, karami da girman siliki ya kamata a sarrafa shi da kowane sabon karfi na karfi. Hanyoyin samun kambi na “kambi” sun yi kama da yadda ake yin wannan tare da abin da aka saba da rawanin farko. A yayin da kake kokarin yin “kambi” kana buƙatar a hankali da kyau yi wannan ɓangaren aikin. Kullum bayyanar gashin gashi ya dogara da yanayin da yake kyau. Bayan wannan, tana kan gaba a gyaran gashi kuma duk hankalin mai waje yana maida hankali ne akan ta.

Kafin a ci gaba da warware dogon gashi, shi ma ya zama tilas a tantance salon abin da ake yin gyaran gashi da tunanin shi a irin tsarin da ya gama. Yin aiwatar da salon gyara gashi daga dogon gashi, maigidan ya kamata ya sami ikon aiwatar da abubuwa da yawa na gajerun hanyoyin aski.

Abun gashi daga dogon gashi na iya kasancewa tare da rabuwar kowane nau'in ko ba tare da su ba, tare da motsi ko raƙuman ruwa na baya. Yawan raƙuman ruwa na hagu da kuma gefen dama na kai ma na iya bambanta sosai.

Matsayi da shugabanin raƙuman ruwa a cikin salon gyara gashi sun dogara da siffar katako. Lokacin yin salo mai gashi a cikin giya, za a iya amfani da zaɓuɓɓuka da yawa: damƙar gashi ta kasance cikin kunshin, daman curls, da sauransu

Articlesarin labarai

Kayan gyaran gashi na ponytail

Saƙa gashi

Gashi mai aski da Semi-Boxing

5 Sharhi kan "Salon gyaran gashi."

Yana da kyau idan mai bushewar gashi sanye take da aikin ionization, godiya ga wanda gashi zai sami damar haskaka ƙoshin lafiya, ƙyalƙyalin ƙirar su zata ragu. Bayan yin salo tare da irin wannan mai gyara gashi, gashin da ke cikin salon gashi zai zama mai santsi da ƙyalli.

Sannu, babban magana. Wajibi ne a yi ƙarin bayani dalla-dalla.

Ana ɗaukar baƙin ƙarfe na serammic da tourmaline mafi ƙyalli. Don irin wannan salo, ya kamata kuma ku sayi samfurin da ya dace. Idan kun kuskure gashinku da baƙin ƙarfe, to, ku yi hakan ta hanyar da ba ta dace ba daga tushen. Kada kuyi amfani da ƙarfe kowace rana, saboda har da mafi ƙarancin injin din zai bushe gashinku akan lokaci.

Wajibi ne don samar da gashin gashi daga bayan kai daga ƙasa zuwa sama, wato, kambi ya kamata ya bushe na ƙarshe. Ka rarrabe wata tufka da gashi tare da tsefe tare da hakora masu saurin shaƙa a cikin layin kwance, haɗa shi tare da babban goga kuma bushe a cikin shugabanci daga tushen har ƙarshen. An riƙe ƙarshen madafan gashi zuwa ga siffa tare da buroshi mai zagaye a cikin matsayin da ake so, yayin da a ƙarshe bushe su da mai gyara gashi. Aikin busawar sanyi yana da kyau don shimfida ƙarshen.

Akwai wani abu a ciki. Na yarda da kai, godiya ga taimako a cikin wannan al'amari. Kamar yadda koyaushe, duk fasaha mai sauƙi ne.

Dogo da gajere curls - lambobi na saurin gashi mai salo tare da tarko

Wani lokaci yana nuna cewa salo don gajere yana da ɗan sauki fiye da na dogon gashi kuma wannan ba tare da dabaru ba. Amma salo mai zafi don dogon gashi yana ɗaukar lokaci kaɗan. Babban abu shine shirya gashi yadda yakamata don salo sannan ayi aiki a matakai, domin curls ya zama na roba da kuma bazara. Don dogon gashi, salo ana yin shi a matakai uku:

• rarraba gashi zuwa bangarori,
• amfani da m wakili zuwa ga strands,
• perm, tare da zafi karfi na gashi fara daga baya na kai.

Yana da mahimmanci a matse ƙarshen dogon gashi kuma riƙe ba da thanan seconds ba.Ga gajeren gashi, wannan doka tana aiki, kawai bambanci shine cewa za a iya sanya gashi daga kowane yanki kuma ba lallai ba ne a haskaka strands ko ta yaya. Kuma waɗanne sirrin kwanciya da tagar?

Barka dai 'yan mata! Ba zan iya taimakawa ba sai dai in yi fahariya - Na sami damar juyo da gajeren wando dana mai daɗi zuwa zama mai tsada, mai tsawo. A gida!

Wannan ba kara bane! Gashi na na gaske. Ba tare da salo mai salo da sauran “dabaru” ba - kamar yadda ake yi! M? Don haka, labarina. >>>

5 Hanyoyin Salon Gashi

Curls - hujja mai karfi a cikin gwagwarmayar mata don rashin jituwarsu. Tare da taimakonsu, zaku iya ƙirƙirar salon gyara gashi mai ban mamaki. Menene ya kamata ya zama na'urar don ƙirƙirar curls, a waɗanne hanyoyi za a iya kwantar da su da kuma yadda za a magance gashi da karfi?

Nippers na iya yin mu'ujiza a kai

Abin da kuke buƙatar sani game da baƙin ƙarfe?

Tongs kayan aiki ne don ƙirƙirar curls. Amma tunda lokacin da kwanon saman ya ke narkewa, lallai ya zama kanshi ya bushe, in ba haka ba zaku iya ƙona igiyoyin.

Ana zaɓar gashin gashi dangane da nau'in gashi:

• Masu mallakan gashi mai santsi ana bada shawarar siyan kayan aiki tare da ikon bayar da iska mai sanyi, saboda ya yuwu a sauya magani mai zafi tare da sanya matsanancin sanyi.
• Don gashi mai wuya, samfuran da ke nuna alamun inganci masu dacewa sun dace saboda lokacin saduwa da ƙyallen ya zama gajere, amma a wannan lokacin yana da lokaci don zafi.
• Ga kowane nau'in, na'ura tare da yiwuwar ionization ya dace saboda ana yin daskararru a lokacin shigarwa.

Yana da kyau idan kayan aiki suna da saitunan da yawa don daidaita zafin jiki saboda ku iya zaɓar yanayin mafi tsananin dacewa da kanku.

• Yawan curls ya dogara da diamita na kayan aiki na na'urar. Sabili da haka, zaɓi na'urar da adadin nozzles,
• Sanya baƙin ƙarfe daidai da umarnin. Kada ku yi amfani da shi har sai ya sanyaya,
• Saka safar hannu kafin ya yi curling. Wannan ya zama dole don kar ku kona kanku da gangan.

Lokacin yin salo, ya kamata a duba abubuwan da ke gaba:

• Angle don tashin hankali curls. Ainihin kusurwa digiri 90 ne zuwa ga inda ake juyawa na na'urar.
• Kauri daga kashin. An ƙaddara shi gwargwadon tsawon gashi: ga gajeru - kamar lokacin amfani da curlers (amma ba kauri fiye da 4 cm ba), don tsaka-tsakin tsayi - na uku na bakin ciki, na tsawon tsayi - rabin ƙanƙanuwa fiye da na gajere.

Hanyar Curl

Zaɓi hanyar rufe gashi - akwai da yawa daga cikinsu

Kuna iya iska da gashi a jikin kwarin ta hanyoyi biyu: a kwance da a tsaye. A cikin hanyar farko, an bambanta zaɓuɓɓukan curling uku: sama, ƙasa, takwas, kuma a na biyu, zaɓuɓɓuka biyu: karkace ko tare da curls mai gudana.

Hanyoyin kwance a cikin salo na gashi mai zafi: muna amfani da babyliss da sauran ƙira

Lokacin yin salo a kwance, riƙe curler ƙari daga ciki fiye da na waje, wannan zai sa igiyoyin ya kasance ruwan sama.

1. Kwanciya. Anyi amfani dashi don tsara nau'ikan salon gyara gashi. Curls an yi karami da haske, kamar yadda curls suke sanya gashi “nauyi” a bayyanar.
2. Rufewa. Yana samar da salon gyara gashi mai haske a cikin nau'i na babban igiyar ruwa. Ban da sauran zaɓuɓɓukan curling, wannan dabarar kusan ba a taɓa yin amfani da ita ba, galibi ana amfani da ita tare da sauran zaɓuɓɓuka.
3. Adadin mutum takwas. Yana samar da nau'ikan maɓallin siffar karkace, zaku iya ƙirƙirar "wrinkled", haɗa curls. A tukwici na strands kasance a tsakiyar yankin aiki na curling baƙin ƙarfe, saboda abin da curl zama da karfi. Wannan zabin ya shafi matsakaici ne ko dogon gashi.

Yi amfani da 8 ku idan rana na tsayi tsayi

Don cire gashi tare da karfi zuwa ƙasa:

1. Aauki dunƙule, tsefe, ja a kusurwar dama daga kan kai,
2. Kulle shi a hannun hagu, da kayan aiki a hannun damanka,
3. Bude kayan aikin, jagoranta zuwa makullin kuma riƙe shi, sanya babban kayan aikin a saman da kuma abin hawa a kasa,
4. Yi aikin dumama: a hankali jawo kayan aiki ta cikin kulle-kulle zuwa ƙarshen ƙarshen.Kar a saki iyakar, a riƙe su a cikin baƙin ƙarfe.
5. Mun iska da gashi tare da karfi zuwa tushen, karkace ya kamata ya tashi a kusa da na'urar. Domin kada ku ƙona kanku, sanya tsefe a tushen,
6. Riƙe na 5-8 seconds, saboda curl dumama,
7. Bude curling baƙin ƙarfe, saki sakamakon curl,
8. Sanya kulle tare da shirin don ba da damar gashi yayi sanyi.

Kwanciya ana yin su a hanya guda, kawai a mataki na uku an nuna hancin kwarin ɗin a kasa, kuma maɗaukin yana saman.

Tsarin Gashi

Don yin salo adadi takwas:

1. Hada gashinku sosai don tsefe ya zube ba tare da tsayawa ba ko'ina
2. Takeauki toka guda a hannun hagu, kayan aiki a hannun damanka,
3. Bude na'urar, kulle curl. Juya baƙin ƙarfe rabin juya zuwa gare ku,
4. Yi juyin-digiri na 360-digiri, jagoranci madaidaiciya zuwa ga tukwici, da tsagi zuwa gare ku. Yayin yin wannan, cire igiyoyi,
5. Tsaya na 5-8 seconds
6. A hankali cire kwalliyar gashi daga yanki, yi wani juzu'i na 360,
7. Tare da hannunka na dama, juya kayan aiki, kuma tare da hagu na hagu, nuna maƙalar a gefe ɗayan sashin curl, samar da adadi takwas,
8. Tare da kowane sabon juyin juya hali, nasihun yakamata su kasance wuri guda: idan a cikin juyin juya halin nasihu suna kan hannun dama, yayin juyin juya hali na gaba ya kamata su kasance a hannun dama,
9. Bi da ƙarshen curls tare da hanyar gargajiya, kamar sauran zaɓuɓɓuka salo,

Lokacin ƙirƙirar waɗannan curls masu zuwa, riƙe su a daidai matakin daya gabata.

Hanyoyin kwance kai tsaye tare da Rowenta CF 6420, Valera, Atlanta motsa 935, Bosch

Riƙe baƙin ƙarfe a tsaye, curls curls a karkace. Yi salon gyara gashi bayan curling da sanyaya curls. Za'a iya jan ragarar fuska zuwa fuska biyu a gefe daya kuma a bangarorin biyu.

Mahimmanci: lokacin ƙirƙirar curl a gefen dama na na'urar, nuna hannun a ƙasa, kuma datsa gashi daga makullin na'urar. Lokacin ƙirƙirar curl a gefen hagu na na'urar, nuna maɓallin sama, kuma juya daga ƙarshen zuwa kayan aiki.

Don yin salo a tsaye:

1. Auki dunƙule ɗaya kuma ku tafasa shi da kyau,
2. Takeauki gashi a hannun hagun ka da tonon a hannun damanka,
3. Buɗe kayan aiki tare da curler a cikin madaidaiciyar matsayi. Kulle makullin kuma a hankali nuna na'urar zuwa ƙarshen,
4. Yi curl ta hanyar jan kayan aikin daga ƙarshen shinge,
5. Juya baƙin ƙarfe a tsaye kuma karkace ya juya dutsen, yana motsawa daga ƙarshen zuwa tushen,
6. Jira 5-8 seconds, kunna kayan aiki a gaban kishiyar, buɗe kwano kuma a hankali cire su.

Bayan yin curls, kada ku yi amfani da tsefe, amma nan da nan ku sa su cikin gashi kuma kuyi tsari da varnish.

Kayan aikin seta kayan aikin tarho suna aiki cikin aiki

Ingirƙirar curls tare da masu laifi na coli: fasahar salo

Wannan kayan aikin yana taimakawa ƙirƙirar tasirin wrinkles ko yin jeri. Don wannan, an haɗa faranti na musamman. Hakanan ana amfani dashi don cire dukkan gashi lokaci guda.

Don iska da gashi tare da masu laifi na ƙarfe:

1. Wanke kuma bushe gashi, magance shi da ado da tsefe,
2. A haikalin da bayan kai, cire gashi zuwa garesu, gyara sauran tare da shirin,
3. Takeauki maɗauri daga rabuwar kuma riƙe shi a tsayin da ake so tsakanin faranti,
4. Jira 5-8 seconds kuma buɗe na'urar, a hankali yana jagorar ta kulle,
5. Bi matakai 3 da 4 tare da ragowar strands,
6. Rowauki jere na gaba kuma ku dunƙule igiyoyi daga gare ta a daidai wannan hanyar.

Bayan curling, ba kwa buƙatar amfani da tsefe.

Siffofin kulawa da matsakaici, tsayi da gajere yayin aiki tare da fukai

An yi imanin cewa baƙin ƙarfe da sauran kayayyakin salo na lantarki bushe gashi. Amma wannan yana faruwa ne kawai saboda rashin amfani da na'urori.

1. Kafin yanke gashin kanka da abin toka banda shamfu, yi amfani da kwandishan. Wannan zai taimaka wajen kula da lafiyar gashin ku,
2. Sau ɗaya a kowace kwana 7, shafa mai abin rufe fuska, ya kamata ya dace da nau'in gashi.Waɗannan sune yawanci masu amfani da daskararru,
3. Da yamma, yi hadawa tare da tausa, yana da amfani ga fatar kan kuma, gwargwadon, don gashi,
4. Kafin shigarwa, yi amfani da kayan aiki don karewa daga matsanancin zafi.

Babban abu shine kiyaye gashin ka lafiya